M

mastiff87

New Member
Hi guys,

This is the 3rd Landy I've owned recently bought :D but it is the 1st one to have a tow bar/hook. To me it looks really low to the ground, I'm tempted to remove the hole thing including the awful steps! Does it look normal or is just me and the fact I'm not used to it :confused: or perhaps take the steps off see if that helps...

Thank you muchly!
 

Attachments

  • 2.jpg
    2.jpg
    243.7 KB · Views: 446
  • 3.jpg
    3.jpg
    126.9 KB · Views: 430
Looks lower than my Dixon Bate adjustable even at full drop. May be the camera angle though. Measure the actual ground clearance and we can compare. I have exactly 12 inches clearance from the lowest part of my drop plate.
 
Looks a bit low to me, probably been set up by someone who had a wee trailer and thought it would be a good idea to get it a bit more level.
 
discomania said:
Looks a bit low to me, probably been set up by someone who had a wee trailer and thought it would be a good idea to get it a bit more level.
Click to expand...

or that was the height they wanted. Owner customized is my guess used more for a step , than for towing
 
Looks good for ploughing a field... I bought a defender that came with one of those, got rid of it straight off. If something needs towing, find some other mug to do it.. ruddy klingons.
 
Bit low for me, I have a witter adjustable one and never clipped the ground with it when it's on it's highest setting.
 
Looks a bit low to me, and I doubt the steps would survive one big hit. Do they come off?
 
don't think its any lower than my dixon on its lowest setting, though my stabiliser plate drops it further.

those steps are made of toffee and will crush at the first bump, I bent mine reversing the caravan (oops)
 
Looks alright to me;);), strange introduction though, after being here 2 years you'd think you would know about stuff like that:rolleyes::rolleyes::rolleyes:
 
Grimmer said:
Looks alright to me;);), strange introduction though, after being here 2 years you'd think you would know about stuff like that:rolleyes::rolleyes::rolleyes:
Click to expand...

I'll hold my hands up :5bblush5: I don't know about stuff like that. I joined 2 years ago sold my disco that I had at the time and forgot I was a member to be honest till I bought this pain in the arse 90 but that's another thing.

Anyway thank you all for everyone's opinions very much appreciated! The plough has been banished!!
 
According to eu legislation...

A towball should be a max of 450 mm from ground to top, I think the min is 370mm but will check..

Here is the good old copy and paste lol

The million Euro question! The EC Directive 94/20/EC states that the towball height should be between 350 and 420mm with the vehicle in the ‘laden’ condition. Laden condition may have been defined (by the manufacturer) as either fully laden (the maximum technically permitted mass of the vehicle as shown in the vehicle handbook), or, conventionally laden (defined as 68.5kg per specified passenger seat and 6.5kg of luggage per specified passenger and located in the centre of the luggage storage area). Alternatively, the towball may be at the height or height range specified by the vehicle manufacturer in the homologation documents and possibly the vehicle handbook. Not so straightforward!
 
Last edited:
Having towed lots of different horse trailers it can make a huge difference to towing if you can get it about level, so whilst it doesn't look normal its most likely be done to fit a certain type of trailer/carvan. My personal choice for towing is a Witter tow bar,which are fab but not the cheapest. Hope that helps.
 
You must log in or register to reply here.

Similar threads

F
Tow Bar Electrics Freelander 2
Replies
1
Views
329
Nodge68
Nodge68
R
Tow bar bolts
Replies
4
Views
664
Richiemod
R
dag019
Wanted Early Defender Tow Bar Bracket - NRC8208
Replies
0
Views
634
dag019
dag019
styleruk
Another A frame towing question
Replies
9
Views
1K
MrF
M
A
'22 Defender 110 D300 - Smoke from bonnet, low battery
Replies
10
Views
901
angus110
A