Lewis282 · Jul 14, 2015

Evening all
As the the title says, basically my rear electric windows have stopped working and after a few searches on here I've read a lot about window ecu's being the cause of this but in all the threads ive read it's all been on 300tdi's just wondering if my L reg 200 will have one too
cheers

cowasaki · Jul 15, 2015

Not sure off the top of my head but the window ecu isn't actually a necessity. I've wired mine up without on including auto closure

discool · Jul 15, 2015

The 200 series use a relay for the rear windows plus a second relay for the front windows.

Lewis282 · Jul 15, 2015

Where would these relays be located ?

discool · Jul 15, 2015

Lewis282 said:
Where would these relays be located ?

Behind the drivers footwell kick panel.

The Mad Hat Man · Jul 15, 2015

cowasaki said:
Not sure off the top of my head but the window ecu isn't actually a necessity. I've wired mine up without on including auto closure

how yu do auto closure? yu added a timer?

Lewis282 · Jul 15, 2015

Awesome thanks a lot

cowasaki · Jul 15, 2015

The Mad Hat Man said:
how yu do auto closure? yu added a timer?

UNIVERSAL 2 WINDOW CLOSURE SYSTEM / ROLLUP MODULE 4 CAR ALARM OR ON OWN | eBay

A unit like this basically cuts the positive feeds going to the motors and re-directs them through the unit which then work normally using the buttons.

On the unit you have two wires which are positive and negative triggers which you can then attach to something in order to trigger the closure. You could for example attach the negative trigger wire to ignition live. Then when you turn off the ignition the windows close themselves OR like mine attach it to the total closure output on the alarm system.

Here is an example:

Not bad for £8.99 inc postage

OR you might need the 4 window version

http://www.ebay.co.uk/itm/Automatic...102?pt=LH_DefaultDomain_3&hash=item27e71f002e

The Mad Hat Man · Jul 15, 2015

interesting Chinglish

cowasaki · Jul 15, 2015

That was just an example of instructions I found on the web. I normally use the neg trigger you can then fit a simple push button between the pos trigger and ign live to give the driver a "close all windows" button

The Mad Hat Man · Jul 15, 2015

or use the LG/P on W/10/3

Lewis282

Member

cowasaki

Well-Known Member

discool

Well-Known Member

Lewis282

Member

discool

Well-Known Member

The Mad Hat Man

Well-Known Member

Lewis282

Member

cowasaki

Well-Known Member

The Mad Hat Man

Well-Known Member

cowasaki

Well-Known Member

The Mad Hat Man

Well-Known Member

Similar threads