Taffy

Active Member

• May 11, 2009

• #1

Yo guys my brake pads are shot no pads just metal against metal disc!! squealing like mad when I brake and I can see the disc is scored too so I have bought 4 new discs and pads. but unsure am I correct to assume that what Buster on his repair pic jobs for cv joint is same way that I need to do to remove and replace the discs on my disco 200 tdi??

 

leekegs

New Member

• May 11, 2009

• #2

you need to remove the stub axles but the job is simple just take yer time

 

S

Sean

Banned

• May 11, 2009

• #3

have a look here there plents of relivent info

LR4x4 - The Land Rover Forum -> Land Rover Technical Archive

make sure your more than happy that your doing the job right cos if yer brakes dunt work ........

splat

 

Taffy

Active Member

• May 11, 2009

• #4

yeah thanks I have done them on astra and escorts old my prev cars etc it was simple and I did the cv joint on the escort but wasn't sure about the discos etc cheers will have a go and let u know tomorrow nite when I have complete it!!!!

 

Taffy

Active Member

• May 11, 2009

• #5

sean thanks for the link yep perfectly clear and nice easy -) what size is the is the hub socket ?? so I can buy one from halfords.

 

S

Sean

Banned

• May 11, 2009

• #6

Taffy said:

sean thanks for the link yep perfectly clear and nice easy -) what size is the is the hub socket ?? so I can buy one from halfords.

Click to expand...

52mm - halfords will charge a fortune - these are good enough

4x4 Store

if that's the one you mean

 

Taffy

Active Member

• May 11, 2009

• #7

yep that is the one will pop to rollings or motormania etc for that. 52mm massive!!! hehe my sockets goes up to 21mm and got one for the wheel nuts 28mm I think if I remmeber ah well worth it!! my mot 2 weeks ago it breezed thro easily never failed etc but thois time it has advisory note saying offside hub has a slight play so it is good time for me to tighten that up!! thanks mate.

 

shocker

Well-Known Member

• May 12, 2009

• #8

JGS on the 'bay got em on sale today only

Land Rover Wheel Bearing Special Hub Nut Box Spanner on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 17-May-09 21:48:50 BST)

...good forcheap de cats 'n' all sorts

 

discobill

Active Member

• May 12, 2009

• #9

Did mine recently and looked at the cheaper option of a box spanner. Only problem with that is torqueing the thing thing back up properly. In the end I got one of these.... Sealey Sx010 Impact Socket 52Mm 1/2”Sq Drive on eBay, also, Hand Tools, Garage Equipment Tools, Cars, Parts Vehicles (end time 10-Jun-09 14:06:15 BST)


A good investment.

 

elmer_d

Active Member

• May 12, 2009

• #10

discobill said:

Did mine recently and looked at the cheaper option of a box spanner. Only problem with that is torqueing the thing thing back up properly. In the end I got one of these.... Sealey Sx010 Impact Socket 52Mm 1/2”Sq Drive on eBay, also, Hand Tools, Garage Equipment Tools, Cars, Parts Vehicles (end time 10-Jun-09 14:06:15 BST)


A good investment.

Click to expand...

Sorted the torquing problem
short 1/2 inch extension with hole for side bar from a car boot sale
bit of rod fastened through the box spanner and extension bar
Nm - ft/lbs no problem

No icon for blowing me own trumpet