monkfish24

Well-Known Member

• Oct 15, 2016

• #1

Just had a look today at a Disco 300Tdi commercial.

It needs a lot of work but I quite like it...

Is it possible to remove the roof from above the side walls and change it for a new one?

 

Last edited: Oct 15, 2016

Grezzer

Well-Known Member

• Oct 15, 2016

• #2

Anythings possible with them mate but it needs to be done correctly.

 

monkfish24

Well-Known Member

• Oct 15, 2016

• #3

Grezzer said:

Anythings possible with them mate but it needs to be done correctly.

Click to expand...

like anything in life! I don't have any experience with discoveries so is it as simple as with a series/defender where you can just unbolt the roof?

 

DiscoPol

Well-Known Member

• Oct 15, 2016

• #4

monkfish24 said:

like anything in life! I don't have any experience with discoveries so is it as simple as with a series/defender where you can just unbolt the roof?

Click to expand...

nope, its cut and weld

 

Grezzer

Well-Known Member

• Oct 15, 2016

• #5

It's a lot more difficult, you need set yourself some kind of alignment jig, weld something. To make sure corners cut to same length and don't move with roof off then welded back correctly in place. And while your at it if it has sunroofs take them out and plate the holes up.

 

monkfish24

Well-Known Member

• Oct 15, 2016

• #6

Grezzer said:

It's a lot more difficult, you need set yourself some kind of alignment jig, weld something. To make sure corners cut to same length and don't move with roof off then welded back correctly in place. And while your at it if it has sunroofs take them out and plate the holes up.

Click to expand...

Probably easier to repair the rusted metal around the alpine roofs then?