R

Redbullalan

New Member
Hi
Had the dico door fault would not open handle kept sticking i have sorted that out but now the alarm bleeps every time i lock it arrrrrrrr.

Put the lack back as well as i think it should be stops bleeping when i unplug it how can i fix.
im told some magnets need to line up but cannot see anything.
it has not got a lot of play on the bolts so i cannot see it being in the incorect place.
I think this is why my air suspension will not lift im not a hoppy bunny
 
My 1999 disco 2 non air suspension has also just intermittently stopped opening on the rear door handle after trying to unlock it on the remote and it really ****es me off .If i keep on locking and unlocking on the dash board switch it will then let me open the rear door.
 
Hi thanks for that i have sorted the door but on putting the lock back it keeps bleeping the alarm.
i cannot see what i have missed 3 bolts holding it in i don’t see the plastic peg like on most cars for the light and alarm but still keeps bleeping so dam mad with it
 
Hi
Thanks for that how do i find the switch i keep looking for the plastic push switch that works the lights but i don’t see it someone told me it is a magnet but i don’t see that very frustrating all works fine if i unplug the electric from the lock air suspension works but it don’t lock and stops bleeping
 
The switch is inside the actuator.....unplug the connector(C0831) pins 5 and 6 are from the switch.

taildoorswitch.png
 
Last edited:
mmmm not good it is the lock itself little micro switch by the look of it £68:00 for new lock don’t mind the bleep when i lock it but have to unplug the back door lock to get the air suspension working for now it don’t look like a easy way into this lock to get a better look
 
Update> i made a mistake in the first post .....its the other way around >> when the door is closed the switch is open(not closed) so that's why the SLS is working with the connector unplugged cos the door switch is blocked on closed position and the BCU receives an earth through it.....try to isolate somehow contacts on pins 5 and 6 from the connector(or at least one of them...pull it out from the connector) and then the only problem will be that the alarm will not work if somebody opens the tail door .....at least untill u sort it out u'll have central locking.

i erased the previous bull**** ...sorry for that
 
Last edited:
Thanks will strip it back tomorrow with a bit of slack so if i get the incorrect one i can re connect.
Thank you for your time been a real head ache rand about 10 scrappys today not one in i hope it will not be long if i can sort in the short term
 
Many thanks for the help pin 5 isolated the problem got a new lock on order but now i don’t have the bleep when locking the car and the air suspension works fine
Thanks for all the feedback
 
You must log in or register to reply here.

Similar threads

J
D2 - Constant 'Lights On' Chime sounding when driving - any ideas?
Replies
4
Views
256
john snoo
J
P
Help needed please
Replies
8
Views
439
Firebobby1
Firebobby1
kurgan
Disco 1 Driver door lock and central locking issues.
Replies
8
Views
873
kurgan
kurgan
J
Freelander 1 Tailgate door
Replies
4
Views
675
joel4507
J
A
Discovery 3 Air Suspension Red Fault Light
2
Replies
22
Views
3K
sierrafery
sierrafery