P

Phillipssam

New Member

• Nov 13, 2019

• #1

Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks

 

JohnM70

Well-Known Member

LZIR Despatch Agent

• Nov 13, 2019

• #2

Phillipssam said:

Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks

Click to expand...

Please re-post in the Discovery Section.

@blue beasty

 

P

Phillipssam

New Member

• Nov 13, 2019

• #3

I tried loads of other sections and this was the only one that would let me post...all the others said I didn't have the right permissions?!

 

Hippo

Lord Hippo

• Nov 13, 2019

• #4

Welcome to the forum

Ask in the discovery section. If they dunt know then the same powered lift n turn gear selector is used on rr's so ask in the range rover section.

Main forum index:
www.landyzone.co.uk/forum

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

 

GrumpyGel

Well-Known Member

• Nov 14, 2019

• #5

Alternatively, ask in a decent forum...

https://www.landyzone.co.uk/forum/land-rover-freelander.9/

Begin your question something like, "I'm fed up with my current pile of shite, recommendations for a decent vehicle please".

 

L

lynall

Well-Known Member

Full Member

• Nov 14, 2019

• #6

Phillipssam said:

Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks

Click to expand...

If you put your location there might be someone near with a code reader.
If no go join the D3/4 forum and ask on there.

 

GrumpyGel

Well-Known Member

• Nov 14, 2019

• #7

If its the same one as on Evoque, I know they had quality issues initially (shock horror!) with the mouldings on the bits that could catch - but I believe that stopped it poppin up, not turning.

 

P

Phillipssam

New Member

• Nov 14, 2019

• #8

Thanks everyone will repost in disco forum