Thomo1927

Active Member

• Mar 16, 2015

• #1

Looks like my head gasket has gone Coming home from work and the heating was cold then the temperature went right up before I pulled over. Opened the expansion tank and it was bubbling right up.

By the time I got home 20 mins later the heaters were blowing warm air ,What head gasket shall I get ? Was there an upgrade or anything different, hoping to crack on this weekend. Cheers

 

chaz88

New Member

• Mar 16, 2015

• #2

Get the thickest one you can 3 hole I believe

 

Thomo1927

Active Member

• Mar 16, 2015

• #3

chaz88 said:

Get the thickest one you can 3 hole I believe

Click to expand...

Cheers chaz

 

Thomo1927

Active Member

• Mar 16, 2015

• #4

Forgot to add that when I opened the bonnet there was steam coming from the top of the radiator ,Any ideas why ? Cheers

 

markSX

Active Member

• Mar 16, 2015

• #5

Thomo1927 said:

Forgot to add that when I opened the bonnet there was steam coming from the top of the radiator ,Any ideas why ? Cheers

Click to expand...

Maybe that the rad has gone causing the engine to overheat.

 

White_Disco

Active Member

• Mar 16, 2015

• #6

Don't immediately assume the worst! Check for busted rad, leaking hose clips or a split hose, symptoms may just be from water loss

 

Thomo1927

Active Member

• Mar 17, 2015

• #7

Thanks for all the advice , There's still coolant in the expansion tank so would you use it for a short distance ? I need my disco till I can sort out whatever the problem is.

 

chrisstdt

Well-Known Member

• Mar 17, 2015

• #8

Depends if you want to do more damage ? If your going to fix it then check for coolant leaks ,if the rad or a pipe is leaking then that will need replaced wheather it needs a hg or not

 

Thomo1927

Active Member

• Mar 17, 2015

• #9

Just been out to check the water level etc ,Put a bit of antifreeze in .When I checked the bolts on the head they were all loose ? Could this have something to do with it and do they need to be torqued tight. Cheers

 

chrisstdt

Well-Known Member

• Mar 17, 2015

• #10

Might explain it ! if the main head bolts are slack and the gasket has been leaking you will be very lucky if re torqueing them solves your problem but gota be worth a try

 

davidsmith1307

Well-Known Member

• Mar 17, 2015

• #11

Can you get away with re-torquing head bolts once they have been stretched? I suspect not.

 

chrisstdt

Well-Known Member

• Mar 17, 2015

• #12

I suspect the gasket wont seal second time round either

 

chaz88

New Member

• Mar 17, 2015

• #13

Whip it of and replace
It's a simple job if your handy with a set of spanners

 

Thomo1927

Active Member

• Mar 17, 2015

• #14

Thanks for all the advice , new head gasket going on this weekend. Cheers

 

trax

.

Events Planner

• Mar 17, 2015

• #15

davidsmith1307 said:

Can you get away with re-torquing head bolts once they have been stretched? I suspect not.

Click to expand...

yes, just check they are within the specific length.

 

S

SpiritMR

Banned

• Mar 18, 2015

• #16

Got a full engine you can have if you come remove it.

New head,
Injectors,
Head gasket,
Core plugs,
Timing belt,
Serpentine belt,
Water pump,
Full service 6k ago,

Over 4months it had 2.5k spent on it. All done by famous 4 Louth. Free to a good home.
Otherwise it will be going to the scrap man on friday.

Really don't want it too.

 

chaz88

New Member

• Mar 18, 2015

• #17

Where are you?