S

somervillearron14

Member
hi guys

so i bought a discovery 2 and i have noticed it is sitting a lot higher at the front than the back but only since i jacked it up to swap the wheels?

will it settle down? also i removed the bar that goes across the front axle as it was rotted through but its been sitting high since before that was removed
 
:eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek:
"Removed the bar that goes across the front axle"?
Do you mean the Panhard rod?
Big question although I suspect the answer is obvious, do you have air or spring suspension at the rear?
But seriously, the front end sounds more dangerous at the mo.
 
I am going to make a wild guess that this is the rotted out tube you removed?
upload_2020-8-1_9-37-50.png


Cheers
 
somervillearron14 said:
hi guys

so i bought a discovery 2 and i have noticed it is sitting a lot higher at the front than the back but only since i jacked it up to swap the wheels?

will it settle down? also i removed the bar that goes across the front axle as it was rotted through but its been sitting high since before that was removed
Click to expand...


Maybe it is actually sitting lower at the rear?
Air suspension model?
 
Stanleysteamer said:
:eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek:
"Removed the bar that goes across the front axle"?
Do you mean the Panhard rod?
Big question although I suspect the answer is obvious, do you have air or spring suspension at the rear?
But seriously, the front end sounds more dangerous at the mo.
Click to expand...
its not being driven like that mate im waiting on the part first its obviously there for a reason!

nah it failed its mot because the bar in one of the replys above was rotted out completely,surprisingly the mot tester said if i take it home remove it and take it back hell pass it

so i ordered the new bit the old one was past saving and it passed its mot

its springs all around
 
lynall said:
Maybe it is actually sitting lower at the rear?
Air suspension model?
Click to expand...
definately high at the front 100% the bar was just removed for the mot im waiting on a new one,from what ive read people put spacers on these bars to lift the suspension so its probably because the bar isnt on?
 
somervillearron14 said:
definately high at the front 100% the bar was just removed for the mot im waiting on a new one,from what ive read people put spacers on these bars to lift the suspension so its probably because the bar isnt on?
Click to expand...

The bar is nothing, it is just a steering protector, and is not the cause of your car sitting funny.

Have you a pic of how it is sitting?

What spec is the car S/GS/XS/ES?

Where did you jack the car to change the tyres/wheels?
 
Have you started and driven the vehicle since jacking it up? If not, do so as it will settle down
Griff
 
lynall said:
The bar is nothing, it is just a steering protector, and is not the cause of your car sitting funny.

Have you a pic of how it is sitting?

What spec is the car S/GS/XS/ES?

Where did you jack the car to change the tyres/wheels?
Click to expand...
im not sure of the model it has everything like leather ect

heres a picture of it in the background
107858759_3208546672530266_7710029461720000693_n.jpg


it came with those horrible wheels on it so i changed them for ones similar to these

c3ba005de2921f33c884d3e0c78fc055.jpg


they where the same size ect and fitted fine,there was a lot of rot under the car so i was carefull where i jacked it up i used arms

as you can see in the picture its sitting level but as soon as i put it down afte taking the bar off and changing the wheels the front is way higher

and it has springs all round,its not really been driven am i correct in saying it will settle after being driven for a while?
 
I asked spec as was wondering if still on air? then I read your comment on coils
I wonder if the coils are the right ones for the car?

Pic of mine from a long time ago, does look slightly higher at the front?
Screen Shot 2020-08-02 at 19.54.50.png
 
Mine also sits slightly higher at the front (air springs on the rear) since I changed front springs to new and also shocks to Bilsteins. But both the front and rear within spec.
upload_2020-8-4_11-5-44.png
 
You must log in or register to reply here.

Similar threads

C
2" lift spring and shock discovery 2
Replies
0
Views
284
Chips666
C
A
Discovery 2 Part Identification Request
Replies
9
Views
723
Badger688
Badger688
MAF Diver
Disco 2 Unknown coolant leak at the front onto the oil filter and diff
Replies
0
Views
170
MAF Diver
MAF Diver
Rickspark
D2 Front window regulator slider
Replies
1
Views
228
Rickspark
Rickspark
J
Discovery 2 td5 failed r9 to fuel pump
Replies
11
Views
764
Jambo2301
J