Bustergonad · Nov 10, 2016

HI landygang I have a td5 metropolis 03 reg I've experienced in the last couple of weeks had juddering between 2500-3000 rpm if I accelerate hard if I do it slowly it on anyway I was advised by one of my friends the the clutch packs were slipping in the auto box as he'd had the same problem so found a second hand box with 84000 on it fitted it 1st I had no drive in and out a few times and drive engaged drove it a few miles then the juddering started I find it hard to believe that the 2nd hand box has exactly the same problem.
Please help it's driving me cuckoo an advice would be great.
Cheers

gemsdad · Nov 11, 2016

Bustergonad said:
HI landygang I have a td5 metropolis 03 reg I've experienced in the last couple of weeks had juddering between 2500-3000 rpm if I accelerate hard if I do it slowly it on anyway I was advised by one of my friends the the clutch packs were slipping in the auto box as he'd had the same problem so found a second hand box with 84000 on it fitted it 1st I had no drive in and out a few times and drive engaged drove it a few miles then the juddering started I find it hard to believe that the 2nd hand box has exactly the same problem.
Please help it's driving me cuckoo an advice would be great.
Cheers

try a ATF and filter change,see if that helps.

Bustergonad · Nov 11, 2016

gemsdad said:
try a ATF and filter change,see if that helps.

Cheers m8 tried that on old box and new 1

gemsdad · Nov 11, 2016

Bustergonad said:
Cheers m8 tried that on old box and new 1

Ok,have tried diagnostics yet?

Bustergonad · Nov 11, 2016

Yes m8 no faults on nancom

gemsdad · Nov 11, 2016

Bustergonad said:
Yes m8 no faults on nancom

ok,nothing at all,on engine or g/box?.

Bustergonad · Nov 11, 2016

gemsdad said:
ok,nothing at all,on engine or g/box?.

No m8 nothing at all

Bustergonad · Nov 11, 2016

Someone mentioned on another forum that it could be a bent flexi plate !!!

gemsdad · Nov 11, 2016

Bustergonad said:
No m8 nothing at all

ok,so if nothing comes up on diagnostics,then it must be a mechanical problem,what that is i do not know.

gemsdad · Nov 11, 2016

Bustergonad said:
Someone mentioned on another forum that it could be a bent flexi plate !!!

if it is that,how did it get damaged in the first place??

gstuart · Nov 11, 2016

this may sound nuts but are the props , ujs , drive shafts etc , tracking all ok

seeing you've also put another box in

did u reuse the same torque convertor

gearbox, engine mounting etc all ok

Bustergonad · Nov 11, 2016

gemsdad said:
if it is that,how did it get damaged in the first place??

I'm not sure tbh but I have spoken to ashcroft and they have said that it is possible for them to bend but very rare just seems funny that both

Bustergonad · Nov 11, 2016

All seems ok and I bought the torque converter with the new box

gemsdad · Nov 11, 2016

Did you replace the propshaft back in the same bolt holes you took it from?.

Bustergonad

Member

Attachments

gemsdad

NOT BOTHERED.

Bustergonad

Member

gemsdad

NOT BOTHERED.

Bustergonad

Member

gemsdad

NOT BOTHERED.

Bustergonad

Member

Bustergonad

Member

gemsdad

NOT BOTHERED.

gemsdad

NOT BOTHERED.

gstuart

D3 Grandad

Bustergonad

Member

Bustergonad

Member

gemsdad

NOT BOTHERED.

Similar threads