C

Coastguard

Member

• Jan 28, 2011

• #1

Mine has now just about had it, a comment the other day suggested that "you need to get a bit more bumper on that rust". So I'm now searching for a secondhand one in reasonable condition if anyone knows of one, ideally in the Kent/East Sussex/Essex area it would be appreciated.
Secondly, am I correct in thinking that the fittings are the same for a 200 TDi as they are for a 300 ??

CG

 

D

Dicovery maniac

New Member

• Jan 28, 2011

• #2

the fittings are the same spoke to a guy at peterborough last year who had a full steel bumper from a 300 on his 200tdi but obviously if you have a 300 you can't put 200 tdi bumper on due to lights

 

C

Coastguard

Member

• Feb 13, 2011

• #3

I've found a replacement for my tdi, but the piece of moulded rubber that serves as a foot grip when stepping in or out of the back is missing. Its the piece that sits on top of the rear bumper and to the left. Does anyone know if this can be purchased seperately as I cant find one on line anywhere ?

 

uncle albert

New Member

• Feb 13, 2011

• #4

Coastguard said:

I've found a replacement for my tdi, but the piece of moulded rubber that serves as a foot grip when stepping in or out of the back is missing. Its the piece that sits on top of the rear bumper and to the left. Does anyone know if this can be purchased seperately as I cant find one on line anywhere ?

Click to expand...

wasnt there one on your old one? (re-use)

 

P

paul_c

New Member

• Feb 13, 2011

• #5

It can be transferred from one bumper to the other.

 

discool

Well-Known Member

• Feb 13, 2011

• #6

The step mats have different part numbers NTC5102PUB upto VIN LA081991 (200) and BTR9434PMD (300) from VIN MA081992 so there's a difference.

 

uncle albert

New Member

• Feb 13, 2011

• #7

so line it up and redrill holes in plastic