Lej · Jul 26, 2020

Hello everyone,

An easy task this week... or so you would have thought...

I have a 200 tdi discovery 1 engine in my 1986 land rover ninety. I have replaced the aux belt for the alternator and water pump twice in less than a year.

I have purchased two different brands, and both were as useless as each other... a couple of months in and they squeal like a pig. Looking at the belts I would have said they are too narrow.
Can anyone link me to any reliable belts or even better- tried and tested?

Thank you!

Stanleysteamer · Jul 26, 2020

Are you absolutely sure the pulleys are in line?

Lej · Jul 26, 2020

Stanleysteamer said:
Are you absolutely sure the pulleys are in line?

Hi Stanley,

Yep, all aligned. I've just done the water pump with new bearings and gasket. I've checked and triple checked I've got the right tension on the belts, still the same results. The overall condition of the pulley wheels are very good.

Stanleysteamer · Jul 26, 2020

Lej said:
Hi Stanley,

Yep, all aligned. I've just done the water pump with new bearings and gasket. I've checked and triple checked I've got the right tension on the belts, still the same results. The overall condition of the pulley wheels are very good.

Good for you, then you just need to hope someone with more relevant experience on the model comes back to you, someone like @discool .as he told me the other day he knows about 200tdi Discos. Mine are all later.

discool · Jul 26, 2020

Stanleysteamer said:
Good for you, then you just need to hope someone with more relevant experience on the model comes back to you, someone like @discool .as he told me the other day he knows about 200tdi Discos. Mine are all later.

Umm, if I state anything on this forum relating to the D1 it’s the series, so it’s a 200 series NOT 200tdi there’s a difference. I’ve never had any interest in diesel engines... perhaps if U wish to quote people in the future do it correctly.

discool · Jul 26, 2020

Lej said:
Hello everyone,

An easy task this week... or so you would have thought...

I have a 200 tdi discovery 1 engine in my 1986 land rover ninety. I have replaced the aux belt for the alternator and water pump twice in less than a year.

I have purchased two different brands, and both were as useless as each other... a couple of months in and they squeal like a pig. Looking at the belts I would have said they are too narrow.
Can anyone link me to any reliable belts or even better- tried and tested?

Thank you!

The alternator belt when the engine left the factory part number was ETC7469, and the spacer RTC5689
As for the the belt for the water pump pulley ERR810 but the parts book description is “belt-ve power assisted steering“.
I expect the numbers have been superseded by now it the belts are still available. Most if not major belt manufacturers have a cross reference list with the vehicle manufacturer’s part numbers.

And so back to work

Stanleysteamer · Jul 26, 2020

discool said:
Umm, if I state anything on this forum relating to the D1 it’s the series, so it’s a 200 series NOT 200tdi there’s a difference. I’ve never had any interest in diesel engines... perhaps if U wish to quote people in the future do it correctly.

to quote you
"

discool said:
I have nothing to do better on my one hour journey on a train from work than look a your posts, and then raise my eyes by the lack of knowledge that you have on a D1 & D2 which you own but still post, but then Ive been interested in the early discos a long time and with my early RR before its demise and before Forums.

"
and yet, after telling me that you are trolling me you now say you know nothing about 200tdis!
Well, that is good to know!
I was prepared to take you seriously until this last post.
You can now fu ck off and screw yourself until you actually help someone on this forum!

Stanleysteamer · Jul 26, 2020

Stanleysteamer said:
to quote you
"
"
and yet, after telling me that you are trolling me you now say you know nothing about 200tdis!
Well, that is good to know!
I was prepared to take you seriously until this last post.
You can now fu ck off and screw yourself until you actually help someone on this forum!

Oh whoops, you just did! Well maybe I can stimulate you to do that a bit more often!

Lej · Jul 26, 2020

Eeeyup, chill out a bit guys... you only have one life so live it

Anyway, back to the question... Perhaps I'd be better off going to a land rover specialist and seeing what they use?

Stanleysteamer · Jul 26, 2020

Lej said:
Eeeyup, chill out a bit guys... you only have one life so live it

Anyway, back to the question... Perhaps I'd be better off going to a land rover specialist and seeing what they use?

No, don't bother just yet, some one on here who knows your engine will come on and tell you about it.
Ignore the bollox between members, tis nothing.
There are plenty of experienced and professional peeps on here. All you need is patience.

Lej · Jul 26, 2020

Stanleysteamer said:
No, don't bother just yet, some one on here who knows your engine will come on and tell you about it.
Ignore the bollox between members, tis nothing.
There are plenty of experienced and professional peeps on here. All you need is patience.

The codes you sent are actually coming up with Bearmach belts, I'll wait and see before putting an order in. Thanks for your response

Stanleysteamer · Jul 26, 2020

Lej said:
The codes you sent are actually coming up with Bearmach belts, I'll wait and see before putting an order in. Thanks for your response

I didn't actually send any codes, so this must be Discool's codes however, if in doubt, give someone like Paddocks a look on their website or the phone. If no one else comes on in the meantime.
Best of luck!

Stanleysteamer · Jul 26, 2020

Without wishing to insult you in any way or form, you are aware that it is a good idea to retighten a belt after 100 miles or so as they loosen a bit with use? Please don't get upset if you have done what to most is obvious!

dieseldog69 · Jul 27, 2020

Gates belts or DAYCO, don't waste money of anything else, take that from a 200Tdi long term sufferer who put brand new gates on years ago and only replaced them recently due to fitting a new water pump, alternator and PAS pump recently.

ERR810 is available from DAYCO & Gates
ETC7469 is available from DAYCO & Gates

Lej · Aug 14, 2020

Stanleysteamer said:
Without wishing to insult you in any way or form, you are aware that it is a good idea to retighten a belt after 100 miles or so as they loosen a bit with use? Please don't get upset if you have done what to most is obvious!

I own a Land Rover... I'd say my level of tolerance is quite high after a few years of bolts snapping, fuses blowing, soggy seats and bearings less useful than a Cadbury's creme egg. You haven't offended me I can assure you, but the answer is yes regardless, I check the tension so often my neighbours think I live under the bonnet.

Lej · Aug 14, 2020

dieseldog69 said:
Gates belts or DAYCO, don't waste money of anything else, take that from a 200Tdi long term sufferer who put brand new gates on years ago and only replaced them recently due to fitting a new water pump, alternator and PAS pump recently.

ERR810 is available from DAYCO & Gates
ETC7469 is available from DAYCO & Gates

Excellent! thank you very much, just what I was looking for! Much appreciated.

Lej

Active Member

Stanleysteamer

Well-Known Member

Lej

Active Member

Stanleysteamer

Well-Known Member

discool

Well-Known Member

discool

Well-Known Member

Stanleysteamer

Well-Known Member

Stanleysteamer

Well-Known Member

Lej

Active Member

Stanleysteamer

Well-Known Member

Lej

Active Member

Stanleysteamer

Well-Known Member

Stanleysteamer

Well-Known Member

dieseldog69

Well-Known Member

Lej

Active Member

Lej

Active Member

Similar threads