N

Nomad62

Member

• Dec 19, 2013

• #1

I'm checking the resistance on abs sensors tomorrow on my 03 td4 as per "royturbodiesels" post. Is it definately ok to disconnect the battery? I did this once on a peogeot I owned and then had to pay to get the engine immobiliser unlocked. Don't want to make a similar mistake.

 

K

Klunk

New Member

• Dec 19, 2013

• #2

I had a similar issue once on a 2nd hand car that I didn't have the radio code for!

Sorry I can't be of any help but I'd risk it if it was me.

 

JonFre

Active Member

• Dec 19, 2013

• #3

Nomad62 said:

I'm checking the resistance on abs sensors tomorrow on my 03 td4 as per "royturbodiesels" post. Is it definately ok to disconnect the battery? I did this once on a peogeot I owned and then had to pay to get the engine immobiliser unlocked. Don't want to make a similar mistake.

Click to expand...

Before you disconnect set up a feed from another 12v source, you wont loose any settings by doing this. I think you can buy gadgets with a power source that plug in to the cigar lighter socket if you dont want to rig something up.

 

englishbullterrier

Active Member

• Dec 19, 2013

• #4

Read the handbook. All advice is there.

Just make sure you have the radio code. You may also have to recalibrate your electric windows and tailgate.

 

Carrington224

Well-Known Member

• Dec 19, 2013

• #5

Just get a code saver, only a few quid. Something like this.

Draper 12V Car Vehicle Radio Code Clock Memory Saver 12V Socket Battery Changing | eBay

 

ming

SPACE TWOT

• Dec 20, 2013

• #6

Its pefectily safe just make sure you have the radio code ,just dissconect the + if your doing leccy work but if charging up dissconect both + and - so you dont goose anything

 

B

bodge99

New Member

• Dec 20, 2013

• #7

Hello,

If you are planning to do things which involves you disconnecting the battery a lot then consider one of these: Battery Quick Master Disconnect Isolator Cut Off Switch | eBay

I've got one permanently on the battery. They are very useful...

Bodge99

 

Datatek

Well-Known Member

• Dec 20, 2013

• #8

JonFre said:

Before you disconnect set up a feed from another 12v source, you wont loose any settings by doing this. I think you can buy gadgets with a power source that plug in to the cigar lighter socket if you dont want to rig something up.

Click to expand...

No point in disconnecting the battery to work on electrics if you are going to keep the systems live from another source. That trick is only suitable when changing the battery.

 

sijwhite

Active Member

• Dec 21, 2013

• #9

datatek said:

no point in disconnecting the battery to work on electrics if you are going to keep the systems live from another source. That trick is only suitable when changing the battery.

Click to expand...

+1