ashleywood.ash said:

neighbours td5 selects gears fine but there is no bite point or drive.
will select H but not L on transfer box.
does this sound like a transfer box fault?

anyone recommend a garage near dronfield, North east derbyshire

Click to expand...

meego said:

Are you 100% sure that the transfer box is fully engaged ?? The fact you can’t get into L suggests the linkage is seized up through lack of use.

Click to expand...

ashleywood.ash said:

it's fully in high.
won't go into low but I don't know if it was like that before this issue.

Click to expand...

meego said:

I would soak the linkage with loose all of some kind, try and get it moving and into low and moving freely between both to rule that out.

Click to expand...

marjon said:

Does it have the diff lock position? I know some do and some dont.
If so try putting it in there.

If not put it in gear and look underneath see if either prop is turning.

If not suspect clutch.

J

Click to expand...