Matt Baxter
Active Member
Cheers its come out so well i might have to do something with mine next, as for paint i think it was satin finish
gummy bear
Active Member
Cheers,both paints where satin,the green was proper mod paint and the black came from Epaintbay on eBay,wouldn't use it again tho as the black is complete crap,
It's not great and looks more Matt than satin and the mud stains it.
It's not great and looks more Matt than satin and the mud stains it.
discodrivercumbria
Well-Known Member
What a great thread!
is that your own home garage? complete with lift!
is that your own home garage? complete with lift!
Matt Baxter
Active Member
Yeah mate
, getting too old (36) for working on motors on the floor
discodrivercumbria
Well-Known Member
Yeah mate
36! your in your prime!
i am 45, but hey if my garage was high enough, i would go out and get one.
for a grand you can get one of ebay
i am envious!!! great thread though!
better than a mills and boon, lol
Absolutely loved reading this project, I'm starting mine tomorrow which our lass isn't to happy or hopeful about the whole ordeal but she knows me well and will try my hardest to get it done. Anyways onto the question, I've been looking at mine and if I'm going to take about 16 - 17" of the back and cut the chassis a wee bit, where does the rear body mounts end up ? I'm putting a 2" body lift all round and thought if I chop and shunt ill loose the rear body mounts won't I ? Help please
Matt Baxter
Active Member
lol don't feel like it with all the aches and pains!
cheers
Absolutely loved reading this project, I'm starting mine tomorrow which our lass isn't to happy or hopeful about the whole ordeal but she knows me well and will try my hardest to get it done. Anyways onto the question, I've been looking at mine and if I'm going to take about 16 - 17" of the back and cut the chassis a wee bit, where does the rear body mounts end up ? I'm putting a 2" body lift all round and thought if I chop and shunt ill loose the rear body mounts won't I ? Help please
have a look at the last post on page 5 the mount I made up is shown in the middle pic, I used the new rear bumper mountings in the chassis.
hth matey and good luck with it not that you'll need it as its really not that hard, oh and don't forget to stick up a thread with plenty of pics!!!!
Matt Baxter
Active Member
but you can see all we did was chop a bit of small box section up weld it the x member of the body and then bolted through the chassis
Last edited:
gummy bear
Active Member
Well be starting all over again soon tho,won't we ?
Thought yours was next for chop ??
Thought yours was next for chop ??
gummy bear
Active Member
Lrdisco93,16-17 seems quite a lot as think we only ended up taking about 14 off of mine (sure Matt will correct me if I'm wrong lol) and tbh I wouldn't want to go much shorter as this has allowed for a very steep departure angle etc and the other thing to bear in mind is your boot space and where you are going to put fuel tank.
As I said I think we took about 14 off and I have a very small boot but it is useable and I wanted to avoid chucking fuel tanks/cans in boot so removing this has allowed is to fit a small custom made tank underneath where the original was,holds about £40 of diesel.
Also,another thing we didnt do is make 2cuts down each side of body,when u measure out and mark out your cuts make sure you try to leave an overlap to work with when u put body back together as this will give u a lot more options than we had.
Hope this helps and good luck with build and as Matt says,lots of pics : )
As I said I think we took about 14 off and I have a very small boot but it is useable and I wanted to avoid chucking fuel tanks/cans in boot so removing this has allowed is to fit a small custom made tank underneath where the original was,holds about £40 of diesel.
Also,another thing we didnt do is make 2cuts down each side of body,when u measure out and mark out your cuts make sure you try to leave an overlap to work with when u put body back together as this will give u a lot more options than we had.
Hope this helps and good luck with build and as Matt says,lots of pics : )
If I were to bobtail mine, which I'm not planning on, it'd also have the rear seats taken out, so it's then all boot .. They're only on a few bolts anyway, so could easily be replaced if the locking latch etc were left in place ..
wiltshire landyman
I’m back
16-17" imo is a tad much but its yr motor obviouslyAbsolutely loved reading this project, I'm starting mine tomorrow which our lass isn't to happy or hopeful about the whole ordeal but she knows me well and will try my hardest to get it done. Anyways onto the question, I've been looking at mine and if I'm going to take about 16 - 17" of the back and cut the chassis a wee bit, where does the rear body mounts end up ? I'm putting a 2" body lift all round and thought if I chop and shunt ill loose the rear body mounts won't I ? Help please
mine hasn't had a massive amount taken off it but rear seats removed and racked out for storage and hooge fuel tank
fuel tank behind seats
Last edited:
Matt Baxter
Active Member
I really want to pickup it but not allowed not as I'm told "we need" 3 seats, but anymore trips down water lane and it'll need bobing
gummy bear
Active Member
Yea,I wanted to keep back seats as I take my family out in it aswell : )
