hovis888

New Member
gents & ladies i need your advice. i have a disco 300tdi and a 110 200tdi.
will the axles, both front and back along with props and trail arms from my disco fit straight onto the 110? or should i keep the Salisbury rear axle on the 110?
 
spot on thanks for the info. will the front prop from the disco fit the 110?

also will my 300TDI gear box fit the 110 200tdi engine
 
Hi, I would check the front prop lengths for your 300 onto the 200 tdi. I don't think they will fit unless you use a spacer. I fitted a Salisbury on the front of my 110. 200tdi. I had to get a 300tdi front prop as if I remember correctly the 200 sits a little further back than a 300 but with a Salisbury on the front the standard 200 prop is a bit short. I didn't want to use spacers as I was going to do a few trips across Morocco.
 
thanks for the advice. i think when i get home i will be spending my time off in the workshop making a full list on must haves.
 
also iirc the disco brake setup has fewer pots than the 110, so you would want to keep the defender brakes.. i'm not sure how this complicates matters re abs/vented and your defender setup.

probably best getting the axle id number from each axle

and the rear disco axle mightn't be rated for the 110s weight rating.
 

Similar threads