H

hovis888

New Member

• Jun 30, 2014

• #1

gents & ladies i need your advice. i have a disco 300tdi and a 110 200tdi.
will the axles, both front and back along with props and trail arms from my disco fit straight onto the 110? or should i keep the Salisbury rear axle on the 110?

 

Dr_evil

Banned

• Jun 30, 2014

• #2

110 rear has larger springs but front will fit without mods. Leave the sals

 

H

hovis888

New Member

• Jun 30, 2014

• #3

spot on thanks for the info. will the front prop from the disco fit the 110?

also will my 300TDI gear box fit the 110 200tdi engine

 

Dr_evil

Banned

• Jun 30, 2014

• #4

no idea, google prop lengths

yes it will but you'll have to modify it to make it work

 

H

hovis888

New Member

• Jun 30, 2014

• #5

i think i will just buy some wide angle props for it and see if anyone has the specs i need to do it.

 

mikescuba

Well-Known Member

• Jul 1, 2014

• #6

Hi, I would check the front prop lengths for your 300 onto the 200 tdi. I don't think they will fit unless you use a spacer. I fitted a Salisbury on the front of my 110. 200tdi. I had to get a 300tdi front prop as if I remember correctly the 200 sits a little further back than a 300 but with a Salisbury on the front the standard 200 prop is a bit short. I didn't want to use spacers as I was going to do a few trips across Morocco.

 

H

hovis888

New Member

• Jul 2, 2014

• #7

thanks for the advice. i think when i get home i will be spending my time off in the workshop making a full list on must haves.

 

trax

.

Events Planner

• Jul 2, 2014

• #8

also iirc the disco brake setup has fewer pots than the 110, so you would want to keep the defender brakes.. i'm not sure how this complicates matters re abs/vented and your defender setup.

probably best getting the axle id number from each axle

and the rear disco axle mightn't be rated for the 110s weight rating.