T

tpettitt

New Member

• Nov 2, 2007

• #1

Hi All Does anyone know anything about an ABS failure code 012?
It sounds expensive if a new pump is required?
Anyone out there had to replace one?

 

Pikey

Dummy Ejection Facilitator..

• Nov 2, 2007

• #2

Full list of abs fault codes LandRover : ABS ECU fault code identification

12 codes seem to be no output or airgap problems

 

T

tpettitt

New Member

• Nov 6, 2007

• #3

Just had the Fault Code Diagnostics done this morning at £30.00p.
Result came up as Pump Failure 1 (monitor Line). Fault present.
Anyone had this problem before and cured the problem without it costing a fortune?

 

T

tpettitt

New Member

• Nov 6, 2007

• #4

Hi Redhand
Just had the Fault Code Diagnostics done this morning at £30.00p.
Result came up as Pump Failure 1 (monitor Line). Fault present.
Anyone had this problem before and cured the problem without it costing a fortune?

 

scotty15

New Member

• Nov 7, 2007

• #5

It sound like the o/s front abs sensor is faulty I had the same code and it was the sensor.If you want to buy one then try Paddocks they might be britpart items but it is a genuine wabco part and 1/4 of dealer prices but if you still have the warning light on at the moment it will need pluging in and having it reset again.

Scotty

 

T

tpettitt

New Member

• Nov 8, 2007

• #6

Hi Scotty15
Thanks for the reply.
I had the vehicle checked by my trusty garage and to my delight it was only a faulty connector.
Cost of a drink to repair the problem, thats what I call cheap.