Tarantula

New Member

• Oct 19, 2011

• #1

Suddenly my back drivers side window has stopped working from the control unit, but the switch on the window itself works fine. Any ideas?

More annoyingly a day after that my front passenger window started misbehaving. Basically it gets down a few inches then goes clunk clunk clunk and won't go any further. It actually jammed once and I had to move the window with my hand to make it able to go back up. Any thoughts?

Thanks!

 

jamesmartin

Well-Known Member

• Oct 19, 2011

• #2

you window regulator is bust

 

Tarantula

New Member

• Oct 19, 2011

• #3

for which?

 

jamesmartin

Well-Known Member

• Oct 19, 2011

• #4

front passenger,for regulator, try swapping your rear plug to another switch in the panel for rear window

 

Tarantula

New Member

• Oct 19, 2011

• #5

cheers mate!

 

chris07

Active Member

• Oct 19, 2011

• #6

It mite be a dry joint on the sirket board under your glove box

 

Tarantula

New Member

• Oct 19, 2011

• #7

WHat does dry joint mean?

 

surreyrock

Active Member

• Oct 19, 2011

• #8

Tarantula said:

WHat does dry joint mean?

Click to expand...

This is the dry joint fix mate, did it myself couple of weeks ago..

"Repair a Land Rover Discovery electric window ECU to make the rear windows open again"

 

Tarantula

New Member

• Oct 19, 2011

• #9

Ah gotcha.

Shame I a) Have no soldering iron and b) Have never used one

 

Dirtneewbie

New Member

• Oct 22, 2011

• #10

i have the same issue with my 300tdi back nsr window works fine osr window dont work tried swapping the switches over nothing
dont work from both center pannel or window switch any idea?

 

jamesmartin

Well-Known Member

• Oct 22, 2011

• #11

window motor or control unit under dash

 

captain skellon

Active Member

• Oct 23, 2011

• #12

sounds like the regulator on the front
i fixed my rear ones with same problem by taking the switch off and bending the pins a little bit and putting switch back on