A

andytrayback

New Member

• Aug 6, 2012

• #1

hi all new to the site just been reading the posts on here and just wondered if the 2.5td loom needs any modifications for a disco 300tdi coversion into a 90 if so could anyone tell me what? cheers andy

 

F

ferretboy

Active Member

• Aug 6, 2012

• #2

welcome you will need the (ecu) and all the bundles of wire a fuel pump etc its easy but you will need many bits and unless you are very good at vehicle electrics a sparky too !!!!

 

A

andytrayback

New Member

• Aug 6, 2012

• #3

hi thanks for the advise there was a thread on here that said there was only minor alteration to it just wondered wot cheers andy

 

A

andytrayback

New Member

• Aug 6, 2012

• #4

oh and it doesnt have an ecu

 

A

andytrayback

New Member

• Aug 7, 2012

• #5

anyone got any suggestions?

 

Pikey

Dummy Ejection Facilitator..

• Aug 7, 2012

• #6

andytrayback said:

anyone got any suggestions?

Click to expand...

Stick to one thread per question and be a little less impatient. :doh:

 

1

1spin

New Member

• Aug 7, 2012

• #7

andytrayback said:

oh and it doesnt have an ecu

Click to expand...

well then its easy init..... feed for glow plugs, and relay. the rest you have. you may have to extend some wires etc.

 

A

andytrayback

New Member

• Aug 7, 2012

• #8

thanks for the advce

 

A

andytrayback

New Member

• Aug 7, 2012

• #9

i dont mean seem impatient but after a while ur post gets pushed down the pages and nobody reads them and i need to get the old girl back on the road