RogerStenning

RogerStenning

Active Member
OK, just had a female hound of a time replacing the oil filter on my Disco (2000 D2Td5).

To make things easier next time, I'm wondering if it's possible to reroute the oil return pipe that currently runs directly under the oil filter can, so somewhere less in the $%^&* way.

So, first question: Is there a modified pipe made? If so, who does it, and where can it be bought from?
Second question: Has anyone actually done a modification like this?

Cheers in advance :)
 
I found it easiest with a decent pair of grippy work gloves on, takes some squeezing to get yer 'and in though
 
i use these for td5 oil filters
upload_2017-11-29_19-15-54.jpeg
 
You guys appear to be making the assumption that it was done up super tight last time. It wasn't. The can was an aftermarket one bought from Craddocks (part of their Td5 service kit), and somehow, despite being put on properly, seized in place over the last year; the rubber gasket WAS lubed with a light film of oil prior to installation at that time, too, before you ask. The band tool wouldn't fit in the gap, the belt tool kept slipping, and the normal filter pliers (same as Jamesmartin above used) kept slipping due to the damn stupid location of the can combining with me loosing grip on the pliers. It took a locking set of filter pliers and some penetrating oil to get it out, but the problem isn't so much that, as the access to the damn things (and replacing them), hence the question regarding the rerouting of the oil return pipe underneath the can location.

So. Any one know if suck a rerouting part or kit exists, and if anyone has performed such a rerouting?
 
RogerStenning said:
You guys are making the assumption that it was done up super tight last time. It wasn't. The can was an aftermarket one bought from Craddocks (part of their Td5 service kit), and somehow, despite being put on properly, seized in place over the last year; the rubber gasket WAS lubed with a light film of oil prior to installation at that time, too, before you ask. The band tool wouldn't fit in the gap, the belt tool kept slipping, and the normal filter pliers (same as Jamesmartin above used) kept slipping due to the damn stupid location of the can combining with me loosing grip on the pliers. It took a locking set of filter pliers and some penetrating oil to get it out, but the problem isn't so much that, as the access to the damn things (and replacing them), hence the question regarding the rerouting of the oil return pipe underneath the can location.

So. Any one know if suck a rerouting part or kit exists, and if anyone has performed such a rerouting?
Click to expand...
theres no re routing kit i know off, its easier if you remove turbo shielding
 
Dont worry bud i wasnt assuming youd done it up super tight! Similar happend to me, took me 2 hours to get it off!

It only needs doing up hand tight, plus a 1/4 turn.

As I said no one does a re-route pipe, youd have to take your current one to a pipe place (Pirtek etc) have them remove the flanges/banjo and lengthen it.
 
jamesmartin said:
theres no re routing kit i know off, its easier if you remove turbo shielding
Click to expand...
Thanks, I'll bear that in mind :)
I've used an OEM LR filter this time, and got the dedicated filter spanner for it, which'll make it easier to undo, if not easier to get out of there, next time. But I still want to reroute that damned silly pipe. Whoever designed that thing needs a 30mm spanner slapped somewhere useful :eek:.
 
bankz5152 said:
Dont worry bud i wasnt assuming youd done it up super tight! Similar happend to me, took me 2 hours to get it off!

It only needs doing up hand tight, plus a 1/4 turn.

As I said no one does a re-route pipe, youd have to take your current one to a pipe place (Pirtek etc) have them remove the flanges/banjo and lengthen it.
Click to expand...
Hmm. There's a thought. I may well look into that, thanks :)
 
BTW, the locking piers I used is this one, from Draper:
61247_9004.jpg

It's their "53-118mm Self Grip Multi Purpose Oil Filter Wrench". Got mine from Amazon. Works just like a set of mole grips, but with a massively big set of jaws. Excellent bit of kit.
 
You must log in or register to reply here.

Similar threads

Gary Secc
Leaking oil pipe
Replies
0
Views
373
Gary Secc
Gary Secc
Aflyingduckling
Series 3 Fuel Pipe Issue (part 564902)
Replies
1
Views
578
steve2286w
steve2286w
C
Intermittent white smoke and diesel in oil engine
Replies
2
Views
454
miktdish
miktdish
V
LR4 Technical advice please.
Replies
4
Views
908
Graculus
Graculus
Graculus
L405 Engine oil leak / fumes in cabin
Replies
10
Views
2K
marjon
marjon