micknkatenki

Active Member

• Sep 1, 2014

• #1

Hi,

After searching haven't been able to find answer,

I am looking at removing the EGR system from my 2000 discovery and fitting the removal kit, after this do you need to re-map or do any other adjustments ?

All threads have mentioned about removing but not about anything else.

Thanks in advance.

 

thebiglad

Well-Known Member

• Sep 1, 2014

• #2

micknkatenki said:

Hi,

After searching haven't been able to find answer,

I am looking at removing the EGR system from my 2000 discovery and fitting the removal kit, after this do you need to re-map or do any other adjustments ?

All threads have mentioned about removing but not about anything else.

Thanks in advance.

Click to expand...

The only thing I would do is to clean the MAP sensor in the inlet manifold. It will almost certainly be full of crud from the recirculated exhaust gases.

Obviously if you wanted to, you could go onto a remap, but really that's a stage on it's own.


Dave

 

micknkatenki

Active Member

• Sep 1, 2014

• #3

Thanks Dave,

 

L

lanber

Member

• Sep 1, 2014

• #4

hi mate
i took my valve off yesterday and put a blanking kit on and it felt much smoother.
will keep an eye on the mpg

mark a

 

micknkatenki

Active Member

• Sep 1, 2014

• #5

Thanks Mark, am going to buy a full kit and get it fitted.

Removed and cleaned the MAF sensor yesterday, it was bad but made a big difference after