Bartmantd5
New Member
How to change a standard rearview mirror for auto/compass version and whats involved? Ta Bart
discool
Well-Known Member
The question be asked a few times already as I would expect, so let me do a search for you. It’s simples.
https://www.landyzone.co.uk/land-rover/disco-2-compass-mirror-problems.91547/
And welcome to the Forum.
https://www.landyzone.co.uk/land-rover/disco-2-compass-mirror-problems.91547/
And welcome to the Forum.
Bartmantd5
New Member
Thanks and thanks
sierrafery
Well-Known Member
I can answer to such question only one way: you have to remove the existing mirror and fit the compass one
, in most cases the connector is there under the headliner unused
Bartmantd5
New Member
Cheers, will check it outI can answer to such question only one way: you have to remove the existing mirror and fit the compass one
Feathers McGraw
Well-Known Member
You may need to drop the front of the headlining down so you can reach around for the connector as I ended up doing when I swopped the mirror. Easy to do as noted above.
Bartmantd5
New Member
Thanks
Just looking at compass mirrors on eBay and just wondered how the wiring works, in the comments above it indicates the cable will be in the head lining, does this cable run down the mirror fixing and where abouts is the connector on the mirror, is it behind the plastic surround/cover ?
sierrafery
Well-Known Member
The one in the pic was pulled out with the headlining cable connected to it, the connector is within it's "leg"
Thanks, I'll make sure the cable is hidden in the headling before I get one from a breakers
