neilly
Well-Known Member
Hi Mate,
No problems, Unfortunately, one of those things where you need to go thru it step by step, see where you should be getting voltage, If you do move on to the next /previous step in the system that should be seeing voltage, rule out the easy stuff to check before you start looking at the BCU , internal fusebox, IDM inputs/ outputs etc.
Although another thing to check quickly is if you have water damage on the Internal fuse box IDM. as this is a common fault on them if water has got inside.
Also make sure your battery is fully charged up and kept that way while trouble shooting, to avoid getting yourself confused by a low battery.
As said above by @Vanmancan, check and clean all earths you find, which is always good advice to do anyway to avoid dodgy issues.
Cheers
No problems, Unfortunately, one of those things where you need to go thru it step by step, see where you should be getting voltage, If you do move on to the next /previous step in the system that should be seeing voltage, rule out the easy stuff to check before you start looking at the BCU , internal fusebox, IDM inputs/ outputs etc.
Although another thing to check quickly is if you have water damage on the Internal fuse box IDM. as this is a common fault on them if water has got inside.
Also make sure your battery is fully charged up and kept that way while trouble shooting, to avoid getting yourself confused by a low battery.
As said above by @Vanmancan, check and clean all earths you find, which is always good advice to do anyway to avoid dodgy issues.
Cheers