Morning,

has anyone out there got a dog guard fitting kit, or even bits of it, lying around going abegging?
I have a britpart half guard that I got from a gut, but no fitting kit and it turns out the fitting kit is now obsolete with no superseding part, even though they are still selling the guard?
I have contacted Britpart and they have said it will take a long time to get a kit from china. A LONG TIME....

Can anyone help??

cheers Wullie....
 
Do you mean Part No STC50323? If so there are lot of sellers on EBay who offer it with a fitting kit. Contact one of them.
 
If it's like mine its only a couple of little brackets at the bottom, top clips into grab handles
 
If you find a supplier please let us all know. I’ve been looking for one for a while now. The top bracket is what I’m particularly after, as I’m confident of making a half tidy bottom bracket from some aluminium channel.
Perhaps this is one for someone with a 3D printer
 
Yeah, thats the one and the fitting kit is STC50231, I've been trying to get that on its own and its seems impossible.
Thats what I dont get, folk are happy to sell the two together, but you cant get the fitting kit on its own , need to order from China.
Was hoping someone had some bits kicking about in a wagon or a garage that they were not using.....



As Beanwood says, the bottom bracket would be ok, you could fab it up, but the top one, you need to cut a bit off the grab handle and then bolt a new bit in....
Not like the P38 where you used riv nuts.

I dont want to revert to the cable tie solution, my Mrs would go radio rental......again......
 
I have contacted Britpart and they have said it will take a long time to get a kit from china. A LONG TIME....

Hi @wullie

TBH if I could get one in say 6 weeks from China, I'd be OK with that. I just don't fancy hacking together something (Which I know would be less than great) as a permanent solution.
Did they actually suggest ordering was an option?
 
Hi @wullie

TBH if I could get one in say 6 weeks from China, I'd be OK with that. I just don't fancy hacking together something (Which I know would be less than great) as a permanent solution.
Did they actually suggest ordering was an option?

Hi Beanwood,

yeah they did, I will contact them again and see what they say.......they have not come back yet with a delivery time or a price.....
 
Hello Wullie. ,
Have you tried Kevin at Bankhead ind estate in Glenrothes.
He only breaks Disco 2's.
Might have a used set.
Tel no 07969 961385.
I,be got parts from and find him helpful
Worth a call
 
Hello Wullie. ,
Have you tried Kevin at Bankhead ind estate in Glenrothes.
He only breaks Disco 2's.
Might have a used set.
Tel no 07969 961385.
I,be got parts from and find him helpful
Worth a call

Cheers Jim, I will give him a call on Monday, much appreciated, good info, even for other bits!!
 
Hello Wullie. ,
Have you tried Kevin at Bankhead ind estate in Glenrothes.
He only breaks Disco 2's.
Might have a used set.
Tel no 07969 961385.
I,be got parts from and find him helpful
Worth a call

Cheers for that, got bits from Kevin, he seems to know his stuff about Disco 2's, he has plenty about the place! Thanks again!!
 
Hi
I think I may have a brand new one. Ordered a dog guard for my Disco 2 which had the fitting bits but not the guard, hence why I have the bits. Tomorrow I will take a photo of it and if you pm me I can send the pics to you so you can see if it is what you need. Price will just be postage.
Cheers
 
If you find a supplier please let us all know. I’ve been looking for one for a while now. The top bracket is what I’m particularly after, as I’m confident of making a half tidy bottom bracket from some aluminium channel.
Perhaps this is one for someone with a 3D printer
Bit old this now, but are you still looking for top brackets, and the bottom bits, I still have stuff that Wullie no longer seems to need?
 
Hi
I think I may have a brand new one. Ordered a dog guard for my Disco 2 which had the fitting bits but not the guard, hence why I have the bits. Tomorrow I will take a photo of it and if you pm me I can send the pics to you so you can see if it is what you need. Price will just be postage.
Cheers
Do you still have them? I have given up trying to source a full luggage barrier and am going to go with a STC50082AA dog guard. I've found a decent used one, but it does not come with the bits.
 

Similar threads