R

racky

New Member

• Jan 10, 2011

• #1

hi
i need help my 2002 disco td5 auto has no abs or tc light working but abs works and tc don't hdc wont work ether just get 3 bongs and no lights had it on a computer with no coeds

 

sierrafery

Well-Known Member

• Jan 10, 2011

• #2

Did they work and suddenly stopped or u've got it that way...that's important to know

 

R

racky

New Member

• Jan 10, 2011

• #3

thanks for the reply that was the way i got it?

 

sierrafery

Well-Known Member

• Jan 10, 2011

• #4

racky said:

thanks for the reply that was the way i got it?

Click to expand...

In this case check if u have the bulbs there.....the previous owner must have disconnected them to hide the 3 amigos....hopefully he wasnt so electrically minded or naughty to cut the earth outputs from the ECU.

 

R

racky

New Member

• Jan 10, 2011

• #5

yeah i was going to check bulbs tomorrow where is the earth to the ecu?

 

sierrafery

Well-Known Member

• Jan 10, 2011

• #6

The SLABS ECU is providing earth for all related bulbs on different wires and conditions from connector C0504 of it and the bulbs are getting feed from fuse F27(compartment fusebox)...but this one feeds other lamps too so i dont think it's missing.

U have to start from somewhere and the first in this case is the instrument pack..........if u dont have RAVE, or even if u have but u are not experienced in electric measurements its hard to track it anyway.

 

R

racky

New Member

• Jan 10, 2011

• #7

thanks i have auto data going to get stuck in tomorrow i just thought i would ask the question just in case anyone else had the prob I've been a mechanic for little over 10 years so I'm sure i will get there in the end lol:mil35:

 

B

ben.suffolk

Active Member

• Jan 10, 2011

• #8

When I got my disco II the guy had taken the dash off and connected the bulbs up to the oil pressure lamp. So they came on to show they worked but then went off when you started the engine. Very sneaky!!!

Once I reconnected them as should be had the 3 lights on and ended up fitting 3 new sensors and fixing the shuttle valve to finally get them all to stay off.

Ben

 

R

racky

New Member

• Jan 11, 2011

• #9

thanks for that ben will av a look to day, cant belive there are so many dodgy c***ts out there mind you i av seen a lot working in a garage.

 

steadyaway

Active Member

• Jan 11, 2011

• #10

ben.suffolk said:

When I got my disco II the guy had taken the dash off and connected the bulbs up to the oil pressure lamp. So they came on to show they worked but then went off when you started the engine. Very sneaky!!!

Once I reconnected them as should be had the 3 lights on and ended up fitting 3 new sensors and fixing the shuttle valve to finally get them all to stay off.

Ben

Click to expand...

Probably took him longer to fudge it thsn fix it. Toss*r.

 

R

racky

New Member

• Jan 15, 2011

• #11

just a quick update had the instrument panel off and the 3 amigos have been taped over so you couldn't see the lights sneaky f***ing russian:violent:
now waiting for my hawkeye i have just ordered thought it way the way to go as i own a disco to!