S

Skipdog

New Member

• Jul 3, 2012

• #1

Does any one know were to get the piece of rubber that goes between the body and the under side of the arch after they have been re-welded and what to stick/attach it with?

 

Y

YorkSpares

New Member

• Jul 11, 2012

• #2

Skipdog said:

Does any one know were to get the piece of rubber that goes between the body and the under side of the arch after they have been re-welded and what to stick/attach it with?

Click to expand...

Do you have a picture to help guide us in what you need.

 

S

Skipdog

New Member

• Jul 12, 2012

• #3

No I don't but having thought about it I will use a piece of car tyre and hold it in lace with tiger seal

 

C

craykent

Active Member

• Jul 13, 2012

• #4

Ford festa boot rubber works for me
any car park nice n cheap. best bit on um

 

johnny curt 1

Well-Known Member

• Jul 14, 2012

• #5

you on about the 3" rubber edge on the plastic inner wheelarch trim that goes between the inner wheel arch and the outer wing skin

if so all i do is put the old plastic bit back on and then edge it up with a 3" wide strip of flash band heated up with a heat gun and smoothed out with a decorators scraper till the tar oozes out of the edges

then lash it over with plenny of underseal