A

Anaconda

Well-Known Member
My son has a Disco 1 front axle with the short stubby drive shaft inside the hub cover/flange.
Does anyone have a link to the correct top swivel pin and shims.
Many thanks.
 
Not a link but from my D1 workshop manual - Never had to use this section before
 

Attachments

  • D1_Workshop_Manual (1).pdf
    492.4 KB · Views: 100
I cant remember if its the top or bottom swivel bearing but one (i think the top) is different because the ABS sensor goes through it, obvnot a factor unless you have ABS
 
KiwiTDI said:
I cant remember if its the top or bottom swivel bearing but one (i think the top) is different because the ABS sensor goes through it, obvnot a factor unless you have ABS
Click to expand...
The ABS was fitted/option for the 300 series D, so as the OP has done his research and given a part number confirmed in the attached link we can assume that their post relates to the 200 series.
 
Well, who would have thought it?
I already have the shims in stock, tiny bit of play in one side. Want to put off the inevitable for a while, if there is any shims on the top pin at the moment.
 
You must log in or register to reply here.

Similar threads

Mooky
Swivel pin oil change.
Replies
11
Views
1K
Mooky
Mooky
A
90 disc brakes on rear
Replies
0
Views
306
Archer22
A
A
down and out disco 3
Replies
7
Views
353
alex080882
A
Rusty Bucket
Modify front brake hose bracket
Replies
3
Views
543
v8250
v8250
P7XES
Disco 3 oil pump cover
Replies
5
Views
773
Rangieman123
Rangieman123