you can get them on ebay, around £13. you need them to center the wheel, if you dont used them you may [will] get wheel wobbel..
 
spigot rings adjust size of wheel to hub size and centralise wheel.

Spacers are between wheel and hub and alter offset of wheel.
 
sssssorrry fan you is right, i could not remember the name [tis my age] hope i got the rest right.. nurse NURSE..
 
I thought it was just the P38 that needed Spiggot rings to fit L322 and/or Sport/D3 wheels?

Surely they're all interchangeable amongst the newer models?

Guy
 
I'd imagine spigot rings required, sure there is a thread on here about it.
 
http://www.landyzone.co.uk/lz/f10/wheel-nut-info-please-read-103527.html

671601B.jpg


spigotring.gif
 
ummmm think this all may be a bit complecated for me, was wanting to do straight swap on the wheels, will have to keep looking for some 20" wheels to fit my L322 without spigots etc LOL
 
Would the tyre size also not need changing too? Am I right in thinking the entire wheel+tyre diameter on a L322 is greater than on a Sport? If not then I'll shut up!
 
You're right Voguely. The Sport has a lower section tyre than the normal Rangie eg 265/60/18 on the Rangie and 265/55/18 on the sport. Same for the 19" - 55 section on the Rangie and 50 section on the Sport.
 

Similar threads