M

mattfletcher

New Member
Hi guys, got a new problem today. :(:mad: My 1996 4.0 is having difficulty starting, you have to hold the accelerator to the floor and crank it over. It will then start for a couple of seconds and die. I have to repeat this about 4/5 times before it will actually run, at this point it will misfire. No known problems when its actually running just initially starting it. Any suggestions?? Thought it may be due to the fact I hadnt used it for a couple of days as by the time I had done 15 miles to work it started as normal. But on the return journey of 15 miles and half hour rest it failed to fire up straight away.
 
I've got the exact same problem, just started since the weather got really cold, don't know if that is just a coincidence. Hopefully someone has the solution..
 
pop off the dizzy cap and wipe out with a cloth then spray and wipe wd40 to avoid moisture build up.
 
Yeah, going to get the plugs out when I get chance, sounds like its flooding it self, as when you hold the throttle to the floor it will fire and start if only for a few seconds
 
sounds like it trying to start too lean. might have to do with maf sensor / intake temp sensor?
 
As Rasheed says might be worth cleaning the maf did mine the other day it was filthy made a whole heap of difference to the running - not sure if it affects start up no doubt someone will be along to let you know.
 
thanks guys, it is really weird used it quite a bit today and this is what happened; Come out to go to work 8am. started first turn. Nipped to the shop 8.05am. Stuck outside the shop. 15 mile drive to work. 9.30am went to out to collect something for work 13mile round trip. Started first turn. 11.15am went to collect some tyres wouldnt start. Had to pull it in the workshop to check oil level. 11.20am, wouldnt start again. 20 mile round trip to brum and back from Wolverhampton. Wouldnt start at birmingham. 4.00pm, went to fill her up. wouldnt start. 4.10pm started first time at petrol station. 4.20pm left work and started again. ???? Really weird.. looks like Im going to have to give it a mini service and hope it cures it
 
this sounds more like camshaft and crankshaft position sensors. i'd say its time to hook her up to testbook (or similar) and get a full report.
 
You must log in or register to reply here.

Similar threads

F
P38A Starting issues.
Replies
7
Views
665
kermit_rr
kermit_rr
C
New Member With A Disco 2
Replies
3
Views
528
brianp38dse
brianp38dse
E
P38A Is this the head gasket?
Replies
12
Views
1K
Grrrrrr
Grrrrrr
Roverdrive
L322 L322 Battery strangeness
Replies
16
Views
1K
kermit_rr
kermit_rr
A
Freelander 1 WHITE smoke cutting out after few seconds starting
2
Replies
20
Views
2K
Ian M in France
Ian M in France