Does anyone know where to find instructions to fit diff mounts, have searched clutchdusts post, but no joy

Previous Edition Of Lro Magazine Carried Full Instructions But Basically To Change Front One You Have To Take Other Two Off While Supporting Diff On Jack.otherwise You Cannot Wriggle The Front Mounting Out And New One Back In. Caution!!! Put All Bolts In Finger Tight Then Tighten To Recommended Torque.

I recently replaced one of my Rear Diff mounts on my Freelander 1.8 2000 model, went to my LR dealer to ask why a banging noise was coming from the rear when i was changing down to second gear when coming to a turn etc. apparently it's a very common problem for them to wear out. I must say that getting that little buggar out was a difficult job, i had the rear of the car on ramps and jacked the rear diff up, but putting the new rear diff mount in, ****! that was hard, spent ages trying to force the bastard in the smallest of gaps from evey angle, all in all took me a while.

But to put that aside, it's working great now, ha ha, and a huge pain in my arse problem that i was really worried about was fixed with a £12 part.