Henra
New Member
Hi all,
I thought that I would take full advantage of my day off and replace the clutch which let go on me earlier last week. The clutch has been replaced with no issues with an AP item.
Whilst I was there I decided to give the box a clean and to see why my diff lock light was on all of the time regardless of leaver possition.
So, first I cleaned the box -
I then set about checking the switch in the back which seemed as if it had been replaced not that long ago (far too clean for the rest of it).
The leaver moves fine to select Hi/Lo on the Tbox so turned my attention to the diff lock linkage - not the best thing to find as I took the top off....
This is the position that the bar inside is set to.
My question is as follows - in this position is the box stuck in diff lock or not? I am a little out of my depth when it comes to things like this (clutches etc I can do)
I have tried the search function and found a lot of information about the Tboxes, but cannot seem to find anything which indicates what way the linkages mean in correspondance with the diff lock.
If there is a thread about this I appologise and could someone kindly post a link in here, if not could someone please let me know where it should all sit and if the box is stuck in diff lock?
Many thanks
Henry
I thought that I would take full advantage of my day off and replace the clutch which let go on me earlier last week. The clutch has been replaced with no issues with an AP item.
Whilst I was there I decided to give the box a clean and to see why my diff lock light was on all of the time regardless of leaver possition.
So, first I cleaned the box -
I then set about checking the switch in the back which seemed as if it had been replaced not that long ago (far too clean for the rest of it).
The leaver moves fine to select Hi/Lo on the Tbox so turned my attention to the diff lock linkage - not the best thing to find as I took the top off....
This is the position that the bar inside is set to.
My question is as follows - in this position is the box stuck in diff lock or not? I am a little out of my depth when it comes to things like this (clutches etc I can do)
I have tried the search function and found a lot of information about the Tboxes, but cannot seem to find anything which indicates what way the linkages mean in correspondance with the diff lock.
If there is a thread about this I appologise and could someone kindly post a link in here, if not could someone please let me know where it should all sit and if the box is stuck in diff lock?
Many thanks
Henry
Last edited: