D diesel New Member Feb 12, 2009 #1 Hi all..god to be here. Have 2000 TD5. Am trying to change the oil, but cant undo the sump nut. Am sure its 17 mm but wont loosen. Areal pain. Any ideas???
Hi all..god to be here. Have 2000 TD5. Am trying to change the oil, but cant undo the sump nut. Am sure its 17 mm but wont loosen. Areal pain. Any ideas???
B brnocz New Member Feb 12, 2009 #2 what sort of tool kit have got, use a socket and extension bar, or ring spanner a hold on with 1 hand and give it a short sharp tap with a hammer
what sort of tool kit have got, use a socket and extension bar, or ring spanner a hold on with 1 hand and give it a short sharp tap with a hammer
B brnocz New Member Feb 12, 2009 #3 then get hold of the bloke who used all his strength to tighten it and hit him the same way
D diesel New Member Feb 12, 2009 #4 1st thing I tried, but appears to be welded. Damn thing wont budge
B brnocz New Member Feb 12, 2009 #5 if using a socket put the presure on the bar and jerk the tensin on the bar
D diesel New Member Feb 12, 2009 #8 Must admit my tools are aging....Can you recommend the best...I should get??
B brnocz New Member Feb 12, 2009 #9 diesel im going to send a private email to you and if we can talk using im it would be a lot better
