M

marky

Member
Hi.
Could metal connector holding fuel leak off pipe be damaged? Changed leak off pipe & still leaking diesel, can see pool at base of No4 injector. Or maybe injector is fault. I have ordered silicone pipe just to see if the braided one I bought is at fault. Have bit of a lumpy start up also. Any ideas on stopping leak? Thanks.
 
Silicone is no good for spill pipes. Use only proper 1/8" bore spill pipe. Get good stuff from a factors not the crap off Ebay. Number four injectors often spring a leak form where plastic part joins. New one needed. Lumpy start will be a couple of duff glow plugs.
 
Last edited:
i change mine but still leaked ended up useing small cable ties on the pipe ends been ok couple off yeers now
 
wammers said:
Silicone is no good for spill pipes. Use only proper 1/8" bore spill pipe. Get good stuff from a factors not the crap off Ebay. Number four injectors often spring a leak form where plastic part joins. New one needed. Lumpy start will be a couple of duff glow plugs.
Click to expand...

I remember someone posted a repair for No4 injector some time ago, wonder how successful it was :)
 
Well as you well know, if it's man made it can be man repaired. Remember a Sudanese driver being offered help with his Bedford TK in the middle of the desert, he had his injector pump off and was repairing it. He declined, stripped it down and rebuilt it, in a bucket of diesel.:)
 
tomcat59alan said:
Well as you well know, if it's man made it can be man repaired. Remember a Sudanese driver being offered help with his Bedford TK in the middle of the desert, he had his injector pump off and was repairing it. He declined, stripped it down and rebuilt it, in a bucket of diesel.:)
Click to expand...

Well i suppose it depends how long a piece of poxy plastic will hold together with Araldite. Araldite does not generally like a lot of heat.:):D
 
I bought original leak off pipe from eurocarparts, supposed to be for P38, though it does not state what ID it is. Will wait for silicone pipe to arrive, though not sure now, advice recommends, maybe its not up to the job. Will get some small cable ties in meantime. Hope its not injector.......
 
marky said:
I bought original leak off pipe from eurocarparts, supposed to be for P38, though it does not state what ID it is. Will wait for silicone pipe to arrive, though not sure now, advice recommends, maybe its not up to the job. Will get some small cable ties in meantime. Hope its not injector.......
Click to expand...
Silicone pipe is not suitable as Wammers said, it swells and you will have a constant smell of diesel under the bonnet, I know from experience.:eek:
 
Datatek said:
Silicone pipe is not suitable as Wammers said, it swells and you will have a constant smell of diesel under the bonnet, I know from experience.:eek:
Click to expand...

Silicone is only any good if you're using 100% SVO or BIO but then if you are messing around with home brew fuels then you should get Teflon lined hose it's much ticker and very hard to fit, but won't leak and is safe with all fuel types
 
Can diesel leak from wire on injector no.4? stuck my head in to try and see where exactly leak is & looks like bubbling around wire is this poss, also feels bit wet around pipe union, can I slacken off and re tighten nut without causing more probs. Any tips on pin pointing leak welcomed. silicone advice taken on board,will not use.Thanks.
 
marky said:
Can diesel leak from wire on injector no.4? stuck my head in to try and see where exactly leak is & looks like bubbling around wire is this poss, also feels bit wet around pipe union, can I slacken off and re tighten nut without causing more probs. Any tips on pin pointing leak welcomed. silicone advice taken on board,will not use.Thanks.
Click to expand...

Yes that is were it leaks from when the plastic the wire goes into cracks. If you mean the injector pipe union. ALWAYS slacken then re nip. NEVER try to tighten without slackening first.
 
You must log in or register to reply here.

Similar threads

P
Disco 2 Crank speed high
Replies
5
Views
118
mad85
mad85
J
Another P38 2.5DSE 4th injector Question
2
Replies
28
Views
3K
JT_spark
J
D
FL1 TD4 warm start issues
Replies
3
Views
848
Arctic2
Arctic2
A
A loose bolt on CAM sensor
2 3
Replies
44
Views
3K
Arctic2
Arctic2
Graculus
L405 Engine oil leak / fumes in cabin
Replies
10
Views
2K
marjon
marjon