Ok, I'll start from the beginning. Drove home one evening with needle hovering on empty. Got home OK and switched off but the next morning it would turn over but not start. Presumed the tank was empty so I filled it from a jerry can and popped off the feed pipe to to the fuel filter and cranked it. No fuel flowed so I presumed the tank fuel pump had died and ordered a new one (had checked the fuses and they were good and had bypassed fuel relay). The new pump arrived and I began cutting a hole under the back seat to access the old pump (thanks to the template on this forum). Before, I removed the old pump I checked for live at the terminal at the pump - no live (during heater plugs on). I then bypassed the fuel pump relay again by feeding a live from the battery to terminal 5 on relay socket and got live down by the pump. I reconnected old pump but still not pumping so I suspected the old pump really was knackered and removed it. I then also suspected the relay was faulty and swapped it for another but no change. I then put my multimeter on the relay socket and determined that I was getting no live from the computer. I also realized I need 2 new olives to fit the new pump so that is another delay. Any thoughts on why I am not getting a live from computer to the pump relay socket?
Thanks Richard
Thanks Richard