needmoretools

Active Member

• May 28, 2018

• #1

Just a quick question I have a X reg D2 td5. That I've not used since October saving up for parts not etc. I did leave a battery charger on but some thing tripped out the sockets. So the battery whent flat and when I next checked on it and recharged the battery the key fob is not recognised and the alarm goes off. I'm getting the eka on Wednesday from the main dealer in Boston. Then I'm going to try and turn off the immobiliser with my Hawkeye. So if anyone knows if they ever updated it to do it if not does anyone have a nanocom ect that can repogram my keys once I have a valid not etc.thanks.

 

sierrafery

Well-Known Member

• May 28, 2018

• #2

Hawkeye has the ability to program fobs based on the long code, you can try to generate it using the short code from the fob's PCB, it's not 100% that it will work but worth a try , here's the spreadsheet https://www.dropbox.com/s/9hzbo2yalwhhsxu/disco2_fobcode_2_Barcode.xlsx?dl=0

 

G

Gary24

Member

• May 31, 2018

• #3

Thanks for reply. I take it the short code you talk about is 6 digit.

 

sierrafery

Well-Known Member

• May 31, 2018

• #4

Yes, the one on the fob's PCB (the upper one) it can contain letters too, hawkeye needs the long code which comes with new keys

 

Attachments

• 
  Fob code.jpg

  46.3 KB · Views: 221

needmoretools

Active Member

• May 31, 2018

• #5

Thanks for responding sierrafery not have had chance to go online to reply to you. I've not got to main dealer yet to get eka but once I have I will try that. Not having much luck at the moment to get any time to myself.

 

needmoretools

Active Member

• Jun 16, 2018

• #6

Got the eka code and got it running. But when I tried to program the key it said no plips detected. So roof lining is going to come out. Thanks for the help with the replys not had much time doing 60 to 90 hours at work looking after four kids and wive.