E

elprrrrr5

Member
Hello,

I bought a def 110 300 tdi in great condition. Unfortunately during the course of me buying the truck I didn't check the chassi number. 3 days after buying it,I decided to get that chassi area cleaned off to see the vin number and there's nothing there. I did an HPI check and it's all clear. I also have paperwork from the previous owner dating all the way to 2013..... Did I get burned?
 
elprrrrr5 said:
Hello,

I bought a def 110 300 tdi in great condition. Unfortunately during the course of me buying the truck I didn't check the chassi number. 3 days after buying it,I decided to get that chassi area cleaned off to see the vin number and there's nothing there. I did an HPI check and it's all clear. I also have paperwork from the previous owner dating all the way to 2013..... Did I get burned?
Click to expand...

I don't think the VIN number is on the chassis. There will be a chassis number stamped on it, unless it has been re-chassised, and the new owner didn't stamp it, or the area with the number has been replaced.

It is probably fine, but try and get the number stamped on.
 
Turboman said:
I don't think the VIN number is on the chassis. There will be a chassis number stamped on it, unless it has been re-chassised, and the new owner didn't stamp it, or the area with the number has been replaced.

It is probably fine, but try and get the number stamped on.
Click to expand...
 
^^^^ as nobber says, and if it's obviously been done after production it may look dodgy. I swapped my chassis for a galv one & kept the old dumbiron with the number stamped on (for proof of destruction) but it's just about legible. I presume you do have the vin plates on the brake pedal box and inside windscreen?
 
Do not stamp it yourself. Leave it if you have receipts etc.
Number should be in the off side front jacking point. Look there.
Good luck.
 
manchestershire said:
^^^^ as nobber says, and if it's obviously been done after production it may look dodgy. I swapped my chassis for a galv one & kept the old dumbiron with the number stamped on (for proof of destruction) but it's just about legible. I presume you do have the vin plates on the brake pedal box and inside windscreen?
Click to expand...
yes and yes. Unfortunately I am trying to import this vehicle to the states and I think that not having the chassi number is going to be a problem.......
 
Driver side.... am i looking in the right spot?
 

Attachments

  • 20180702_125121.jpg
    20180702_125121.jpg
    307.9 KB · Views: 264
  • 20180702_125121.jpg
    20180702_125121.jpg
    307.9 KB · Views: 265
If you cannot find the Chassis number then I would question you being able to get it into the States.

I found using a bit of WD40 and scotch brite over the area , highlights the numbers if they are faint. Nut looking at the pics , they do not seem to be there. does it look like a repair panel?
Good luck.

Cheers
 
I think I can see a bit of numbering - just towards the lower front of the area you have cleaned. I'd proceed with a small scraper in that area.
 
does any of the recepits say you have had either a new or repaired chassis?

As for stamping a chassis yourself I would not do it.

Having a company do it may be ok as long as they are using the same stamps as Landrover so on the inspection it may pass.
There are other year dates on some of the chassis/brackets which customs inspection may pick up.

(No I'm not telling you where they are)
 
You must log in or register to reply here.

Similar threads

J
High Mileage Freelander 2 - am I crazy or could this be a good buy?
Replies
3
Views
582
Nodge68
Nodge68
L
Disco 3 (LR3) I return to the fold with a Window Fault
Replies
6
Views
585
johnlad
johnlad
M
Soon to be a Landy owner
Replies
3
Views
613
saxavordian
saxavordian
Matt2000
Geoff the 2002 Freelander
Replies
5
Views
1K
Matt2000
Matt2000
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K