moremuckmush

Well-Known Member

• Sep 19, 2021

• #1

Contemplating getting some wheels for the truck , see these below and wondered if they fit/look OK

I have an 89 110 with HD hubs on the front but do have 30mm spacers on there already ,
Anyone got a pick of these type of wheels on just so I get an idea of how much they stick out, I think I know these wheels will only fit mine with the spacers on due to the hubs?
any info appreciated

cheers

 

Attachments

• 
  Screenshot_20210919-175529_eBay.jpg

  292.5 KB · Views: 163

S

slomofo

Well-Known Member

• Sep 19, 2021

• #2

Just as a reference, these were on my old 90 - Challenger 7x16 ET-25 on standard disc braked axle front & rear (no spacers) 33/12.5/16 Simex - Stuck out a bit too much for the PoPo, sounded like a Lancaster Bomber.

 

moremuckmush

Well-Known Member

• Sep 19, 2021

• #3

Thanks for this Pal magic , well past the standard arches then as standard and with spacers I'm going to be looking like a combine harvester

 

kevstar

Well-Known Member

Full Member

• Sep 19, 2021

• #4

moremuckmush said:

Thanks for this Pal magic , well past the standard arches then as standard and with spacers I'm going to be looking like a combine harvester

Click to expand...

Not as much as mine

 

moremuckmush

Well-Known Member

• Sep 19, 2021

• #5

some mud flick of them I bet Pal ,

 

kevstar

Well-Known Member

Full Member

• Sep 19, 2021

• #6

moremuckmush said:

some mud flick of them I bet Pal ,

Click to expand...

The first and only time they have out we were recovering someone bogged down to the floor pans
& my passenger opened the door to see what was happening what a mess lol as we were on full chat haha I had to use a wall paper scraper to scoop the mud out & pressure wash inside it. haha

 

Last edited: Sep 20, 2021

RangerRico

New Member

• Sep 20, 2021

• #7

I think i have these wheels on mine along with extended arches, mine may be ET -32 though im not sure

 

Attachments

• 
  landy wheels.jpg

  333.6 KB · Views: 129
• 
  landy front.jpg

  350.7 KB · Views: 110

moremuckmush

Well-Known Member

• Sep 20, 2021

• #8

looks impressive Pal ... Nice stance on it

 

moremuckmush

Well-Known Member

• Sep 25, 2021

• #9

RangerRico said:

I think i have these wheels on mine along with extended arches, mine may be ET -32 though im not sure

Click to expand...

I'm still looking at these wheels being offered and the seller says his too are -32 offsett, I was hoping I could keep the standard arches but looks like these wheels will stick well past