worthyone

Member
Hi my speedo is bouncing badly, all posts seem to say the cable goes to transfer box, however mine seems to go to front axle any ideas?
 
It looks like it goes. To passenger side of axle
 

Attachments

  • image.jpg
    image.jpg
    57 KB · Views: 162
I've followed it through from axle and it goes up through bulkhead so thinking it must be cable, will look under middle seat tomorrow but can't see breather going into cab, or does it ,
 
Thanks for taking time to reply I can post a picture tomorrow, the pipe is blue and seems to be secured with a nut to axle , I will get a gander under seat to see if the take off is in the normal position if it is it must be me DOH!
 
it is non std breather pipe ,routed as high as possible,the speedo cable comes out of center grommet above it and heads over filter down under the tunnel
 
Thank you I must be having a real senior moment, I will get to under seat tomorrow
Other than that it's a great beast , no leaks loads of new bits rebuilt from chassis up
May be selling after Christmas but like it too much at moment
 

Similar threads