L

landi_idiot

New Member

• Jul 20, 2008

• #1

Hi there is there such thing as a pto that runs of the front of the engine. Not the transfer box or gearbox. I have a overdrive on her and want to run a hydraulic pump of a pto. some one has told me that u can get it to run of the bottom of the engine some where?

 

Grippa

New Member

• Jul 20, 2008

• #2

You can run a hydraulic PTO off of the power steering pump. A lot of people dun't like doing this, but I dun't know wot the reason is.

Bet some feker duz tho'.

 

ratty

I'm not special I'm limited edition

• Jul 20, 2008

• #3

you can run a winch off a drive dog on the bottom pulley.

 

Oddie

AntiSeptic Sandal Wearer

• Jul 20, 2008

• #4

Grippa said:

You can run a hydraulic PTO off of the power steering pump. A lot of people dun't like doing this, but I dun't know wot the reason is.

Bet some feker duz tho'.

Click to expand...

Coz it's really really slow (like doin this fookin typin wivout a keyboard coz its gone tits up!)

 

L

landi_idiot

New Member

• Jul 20, 2008

• #5

Where can i get hold of a drive dog

 

tacr2man

Well-Known Member

• Jul 20, 2008

• #6

L I you can get a bottom pto take of for hyd pto that fits on bottom of transfer box, its a very tight fit with an o/d fitted but just poss. I dont know of any pto that goes on front of engine other than mech pto for capstan winch on series motors. So looks like you would have to engineer one yourself . Good luck

 

ratty

I'm not special I'm limited edition

• Jul 20, 2008

• #7

landi_idiot said:

Where can i get hold of a drive dog

Click to expand...

superwinch


PRODUCTS - Superwinch


Land Rover Winches Winch types and Winching Techniques

 

robint

Well-Known Member

• Jul 20, 2008

• #8

what about this one


Capstan winch with defender bumper on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 21-Jul-08 09:41:50 BST)

 

BOOMER

Bloke from Dorset

• Jul 20, 2008

• #9

This might sound daft but it worked to run a 2 diagphragm pump on a crop sprayer fitted to a 90 I used a few years back so:

Why not use a 12 volt motor to run a pump?

 

ratty

I'm not special I'm limited edition

• Jul 20, 2008

• #10

BoomerV8 said:

This might sound daft but it worked to run a 2 diagphragm pump on a crop sprayer fitted to a 90 I used a few years back so:

Why not use a 12 volt motor to run a pump?

Click to expand...

It aint daft Boomer.

tipper body, spec lift or tail lift electro-hyraulic pumps are capable of running a hyraulic winch with no problems.

 

L

landi_idiot

New Member

• Jul 20, 2008

• #11

I did think about that idea as i have a 3 ton 12v tail lift pump and motro sat in the yard.