Hi all hope you all have a merry Christmas and a happy new year hopefully better than the last one anyway back to the job in hand the oil leak and blue smoke today cleaned everything off and cut the overhang on the head gasket so I could see better and ran it until normal temperature on tick over off but when I rev up blue smoke checked out were the oil was coming from ok so I thought I would do a compression test
Number
1@ 361
2@ 360
3@ 356
4 @ 362
So after that ran it again and checked for oil leak and with the sun shining on the back of the cylinder head I could see a little bubble of oil now what the best thing to do take the head off to investigate or could it be something else any ideas much appreciated thanks
 
Hi all hope you all have a merry Christmasand a happy new year hopefully better thanthe last one anyway back to the job in handthe oil leak and blue smoke today cleanedeverything off and cut the overhang on thehead gasket so I could see better and ran ituntil normal temperature on tick over offbut when I rev up blue smoke checked outwere the oil was coming from ok so Ithought I would do a compression test
Number
1@ 361
2@ 360
3@ 356
4 @ 362
So after that ran it again and checked for oilleak and with the sun shining on the back ofthe cylinder head I could see a little bubbleof oil now what the best thing to do take thehead off to investigate or could it besomething else any ideas much appreciated thanks
 
You've just posted the same thing in the same section of the forum.
If you click on the link I posted above then click on Post New Thread you can start a new thread in the Defender section.
 

Similar threads