S

Spartan117

Member

• Jun 13, 2015

• #1

hi after abit of advice. Im thinking about changing my van back defender to a truck cab. Only problem is that i have a csw rear tub which i replaced a couple of years ago. The rear bulkhead slopes down in the middle. The problem is when i come to bolt the rear of the cab to the rear bulkhead it wont meet up because it sits lower. Is their a replacement bulkhead panel i can put in. Cheers andy

 

S

Spartan117

Member

• Jun 14, 2015

• #2

Ive still got my old tub with the correct rear bulkhead in. Can i swap the two bulkheads?

 

S

Scrum5atk

Member

• Jun 14, 2015

• #3

There isnt a bulkhesd on a few 110?
U may need a filler plate to fill the gap between rear panel and the bulkhead on yr hardtop rear tub
I know u did on series motors

 

S

Scrum5atk

Member

• Jun 14, 2015

• #4

Just buy a truck cab roof and rear panel then bolt to yr exiting tub

 

S

Spartan117

Member

• Jun 14, 2015

• #5

It's the rear panel that won't fit because the bulkhead slopes down. I'll a picture

 

Attachments

• 
  image.jpg

  401.4 KB · Views: 259

S

Spartan117

Member

• Jun 14, 2015

• #6

Here's another picture of the rear bulkhead

 

Attachments

• 
  image.jpg

  279.1 KB · Views: 267

d8moa

Active Member

• Jun 14, 2015

• #7

I am in the process of doing this now... I have brought a roof and window... I now need to buy that bulkhead(full one not half like yours £100) and rear tub top capping (£60 each)

 

Last edited: Jun 14, 2015

S

Spartan117

Member

• Jun 14, 2015

• #8

d8moa said:

I am in the process of doing this now... I have brought a roof and window... I now need to buy that bulkhead(full one not half like yours £100) and rear tub top capping (£60 each)

Click to expand...

Hi mate were abouts are you getting the cappings and bulkhead from

 

d8moa

Active Member

• Jun 14, 2015

• #9

Spartan117 said:

Hi mate were abouts are you getting the cappings and bulkhead from

Click to expand...

Main dealer fella

 

S

Scrum5atk

Member

• Jun 14, 2015

• #10

Not seen a bulkhead like that before

 

bluehaze

Well-Known Member

• Jun 14, 2015

• #11

I'm about to swap my csw roof and cappings for ones which I've refurbished. The lining will also b for sale. Also have a pair of one piece cappings but one needs some welding.

 

d8moa

Active Member

• Jun 19, 2015

• #12

I lied in a previous post... well I didn't lie landrover ####ed up!!
I have just brought the rear tub top caps for £185 Inc vat from the dealers!
They want £300 Inc vat for the tub bulkhead part which I'm not prepaired to pay! It can be easily made with sheet metal or you can do what I'm trying to do which is buy one from a 90 as there more readily available and modify it to fit my 110

 

Brown

Well-Known Member

Full Member

• Jun 19, 2015

• #13

It looks like someone in the past has cut it down and fitted one of those bulkhead removal kits - that's how it looks like it's got a factory finished edge to it. So it looks like a replacement bulkhead panel is needed. Unless you can fabricate your own filler panel.

 

J

jakedog

Member

• Jun 20, 2015

• #14

Image from http://www.mudstuff.co.uk/media/wysiwyg/100_0507.JPG.

I agree bulkhead removal bar as per link



Sent from my iPhone

 

Brown

Well-Known Member

Full Member

• Jun 20, 2015

• #15

Well spotted. Looks very like the Mudstuff offering.