B

ByCameltoVietnam

New Member

• Oct 2, 2012

• #1

Hi there,

Im a bit of a newbie so bare with me.

My 1991 defender's wipers and blower/heater have both stopped working.

The wipers seem to work when they want. The top low speed setting works all the time and the high speed setting works sometimes and sometimes only once the wipers have been put on to low speed. Intermittent rarely works and when it does it wipes about 5x before stopping. Any ideas on why this is happening? I replaced the park switch not long ago so i assume its not that.

The blower does not blow any air out. Before it stopped cold air only came out and now nothing. I ve looked around and it could be the fuse so im going to replace that this weekend, but if that doesnt solve it what could it be?

Thanks very much,
Ben

 

Pikey

Dummy Ejection Facilitator..

• Oct 2, 2012

• #2

me 97's wipers intermittent only works intermitantly anorl.

try a noo park switch.

 

B

ByCameltoVietnam

New Member

• Oct 2, 2012

• #3

Surely if i only replaced the park switch only 3months max, it cant have gone?

 

Pikey

Dummy Ejection Facilitator..

• Oct 2, 2012

• #4

ByCameltoVietnam said:

Surely if i only replaced the park switch only 3months max, it cant have gone?

Click to expand...

It's a landrover. Your lucky it's lasted this long. Speshully if it's a ****part switch..

 

B

ByCameltoVietnam

New Member

• Oct 7, 2012

• #5

Cheers redhand im getting one this week.

Ive changed the fuse on the heater now and still no joy. I also looked around and the air intake grill was blocked with mud and water. The fan was also not spinning easily and was filled with water. Where do i need to go from here? Also im thinking about taking the whole heater box out to have a look and am wondering whether i can drive without the heater unit?

 

Dave90

Well-Known Member

• Oct 7, 2012

• #6

ByCameltoVietnam said:

Cheers redhand im getting one this week.

Ive changed the fuse on the heater now and still no joy. I also looked around and the air intake grill was blocked with mud and water. The fan was also not spinning easily and was filled with water. Where do i need to go from here? Also im thinking about taking the whole heater box out to have a look and am wondering whether i can drive without the heater unit?

Click to expand...

Might be too simple but how heavy is the level that turns the heater on? Ive had a cable come loose and slip off, there should be quite a bit of weight to move the lever, unlikely, but possible

 

B

ByCameltoVietnam

New Member

• Oct 8, 2012

• #7

HI Dave90,

Its quite tough to move and ive looked moved the blower cables and works fine.

 

Dave90

Well-Known Member

• Oct 8, 2012

• #8

ByCameltoVietnam said:

HI Dave90,

Its quite tough to move and ive looked moved the blower cables and works fine.

Click to expand...

Worth a try, always start with the simple stuff

If the fan has had water in it and the fan has seized then it could overload the circuit and blow the fuse as soon as you use it, check the fuse you changed, if that fuse has blown it could be seized

 

Last edited: Oct 8, 2012

Trailpug

New Member

• Oct 8, 2012

• #9

my heater stopped found it was the connector worn out the three prong thing under the bonnet sorry don't know its proper name!!!!
if it helps!!!!!!!!

 

B

ByCameltoVietnam

New Member

• Oct 8, 2012

• #10

OK ill have another look at the fuses....

...i think i checked that an power was running between the three prongs if i did it right that is.

Cheers guys ill look into it.