SJW2511

New Member
Hiya, just thought id get round to posting a thread about my Defender 300tdi that I have started to work on.

Recently purchased a clean example 300tdi off ebay here are the sales pics

1520621_10152155369360730_502841600_n.jpg


1601301_10152155369055730_1059304985_n.jpg


1510876_10152155368560730_1308028490_n.jpg


After an inspection pre sale on site in fading light I gave it a better look once home.

The bulkhead is fantastic

1483400_10152162863860730_1812481643_n.jpg


1511598_10152162864160730_1864413824_n.jpg


Similar condition inside under the mats etc

Rear crossmember although jazzed up with some paint, is solid throughout,

1526630_10152162864505730_123712811_n.jpg


Everything underneath was waxoyled twice a year according the seller and some work with a hammer confirmed everything was solid, outriggers included.

Inside was fairly clean too

1521764_10152162864525730_1009236003_n.jpg


1559629_10152162864575730_1335055816_n.jpg


Decided to take a peak to see if the battery was about to fall out, bit of surface rust but actually solid

1496703_10152167905400730_46234883_n.jpg


Treated that

1522195_10152167906115730_1996422462_n.jpg


Made up some brackets for a battery clamp as it was just held in by a brick and some wood, and oxide painted it

68609_10152170180520730_137976451_n.jpg


In the meantime found my first bit of rot, in the corner of the seatbox

1527034_10152172363070730_1506896403_n.jpg


So decided to get everything out

994422_10152172363325730_328207010_n.jpg


small collection I found

1513204_10152172363335730_1604178880_n.jpg


1017158_10152172364215730_481870963_n.jpg


Drilled the welds and removed the ends on both sides

1604709_10152172364085730_1929330547_n.jpg


994107_10152172364195730_1947728412_n.jpg


1545221_10152172364615730_1060359355_n.jpg


New panels etched primed and in place

1524906_10152174058735730_1131758371_n.jpg


1560636_10152174058890730_800557344_n.jpg


1526819_10152174059020730_1526945766_n.jpg


one coat of black por15 later

1000022_10152175985325730_376408793_n.jpg


neoprene sheet for battery to sit

1524942_10152175985670730_649775257_n.jpg


1512808_10152175985710730_743515729_n.jpg


in the day

1510842_10152177878495730_93257350_n.jpg


new seatbox trim

1004960_10152190538950730_1589873597_n.jpg


1604493_10152190538915730_1735477873_n.jpg


and that little first job was complete

Next up I wanted to stick the spare back on the rear door

picked up this on ebay

1545130_10152172364680730_607803809_n.jpg


Drilled some holes

999226_10152177878400730_458669682_n.jpg


10759_10152177878375730_182178365_n.jpg


Bolted on

69251_10152177878685730_1633562791_n.jpg


1536599_10152177879290730_1245820848_n.jpg


Pulled this off

1505524_10152175984575730_493762363_n.jpg


replaced with black

1005389_10152175984525730_875014599_n.jpg


1551763_10152175985240730_1778999549_n.jpg


Also decided to replace rear fog and reverse with later td5 style round ones, bit of a ball ache, had to order these plugs

10196_10152187254690730_1087774247_n.jpg


1536651_10152190539005730_332777636_n.jpg


Going to order some wheels next week, probs out of these two, im undecided

3771-apd0072_26575r16_insa_turbo_dakar_fitted_on_7x16_black_modulars_set_of_4_includes_delivery_to_uk_mainland_restrictions_apply.jpg

3773-apd0075_26575r16_insa_turbo_traction_track_fitted_on_white_spoke_wheels_set_of_4_includes_delivery_to_uk_mainland_restrictions_apply.jpg


And il be wrapping it at some point, in this colour

1551727_10152187254815730_6061407_n.jpg


Reason iv gone for that over a paint job is simply that its not for a show and shine competition the aim is to make it solid and clean, if I spend a grand+ on a repsray il be ****ting myself everytime it gets dirty or touches a bush! The vehicle was bought because we suffer bad flooding and get stuck in the snow where I live so it is for some function and not a #towie town queen lol

Enjoy!
 
Last edited:
yeah its not cheap but nowhere near the price of a respray, its about 15pm and iv worked out I need 15/16 meters, so looking at 270ish

You can get cheaper stuff, KPMF wrap about £8pm, but after receiving samples for both this avery and the KPMF it looks and feels a bit cheap
 
cheers for the info, interesting stuff :)

im still learning about these, its my first defender, my only other experience being a freelander 2 in the family, this is a bit easier to work on mind lol
 
looks very nice. i think you made a mistake adding the wheel to the back door mind.

people remove them because they cause the door to sag, it's just not strong enough to support the weight, especially if you are thinking about larger tyres.

also if you don't care about showroom finishes, then people hand paint them. should cost around 50quid for paint and bits and bobs. have a search fopr the threads.

welcome :)
 
Cheers for the reply :)

I was aware of the sagging issues but I figured I just prefer the look of it there and the extra room inside, replacing worn hinges is something I'm just going to have to foot for the privellage. That said I know someone who's had one on for years and it's still not sagged. I guess is depends how much abuse you give it or open the door etc.

Regards paint. My initial plan was to roller a paint on. Probably matte black, however I'm caught in between realising is a functional vehicle and my inner ocd of making everything I do as good as poss. :( the wrap seems like a good compromise.
 
It's more than possible to get a very good finish with a roller. Look for the Rugged Guide videos on the method before you commit to wrapping it. IF you roller it yourself, it's easy to touch up if you scratch it but the wrap material will bunch up and tear if you scratch that. Other than that, well done on what looks like a very sound 90.
 
Cheers for the reply :)

I was aware of the sagging issues but I figured I just prefer the look of it there and the extra room inside, replacing worn hinges is something I'm just going to have to foot for the privellage. That said I know someone who's had one on for years and it's still not sagged. I guess is depends how much abuse you give it or open the door etc.

Regards paint. My initial plan was to roller a paint on. Probably matte black, however I'm caught in between realising is a functional vehicle and my inner ocd of making everything I do as good as poss. :( the wrap seems like a good compromise.

Mounting the spare on the rear door doesn't just cause sagging hinges, it will break the frame unless you add some serious strengthening to it. Later models have a better designed door that can better take the weight (I don't know what date the new design was introduced)
 
It's more than possible to get a very good finish with a roller. Look for the Rugged Guide videos on the method before you commit to wrapping it. IF you roller it yourself, it's easy to touch up if you scratch it but the wrap material will bunch up and tear if you scratch that. Other than that, well done on what looks like a very sound 90.

Yeah iv seen a very good finish with rollered on rustleum near spray quality.

I kinda disagree about the commitment though, painting is more of a commitment than wrap as it can be just peeled off to go back to original colour.
 
Mounting the spare on the rear door doesn't just cause sagging hinges, it will break the frame unless you add some serious strengthening to it. Later models have a better designed door that can better take the weight (I don't know what date the new design was introduced)

From what iv read there are two style doors one basic and one with reinforcements for a wheel mount. The latter have extra braces welded in certain points on the frame.

Mine had these braces as well as cutouts in the frame already there to drill the holes through so I can only assume the door was designed for it. I will endeavour to keep my eye on it though
 
If you're sticking with the standard tyre sizes you shouldn't have a problem for some time. The doors do suffer from wheels hanging on them but it's generally accelerated by people mounting silly size wheels/tyres and obviously the rougher the treatment the vehicle gets road/surface wise the quicker it will fail.

Very tidy looking car though. Paint looks too good to hide with wrap! Or is it a case of looking good from afar?
 
Cheers!

Yeah the paint is not bad, there are a few areas where you can tell its oxidising underneath at the edges so would need rubbing down and painting, of which im rubbish at, plus im not a massive fan of the green i think the met grey looks a lot more modern.

But yeah its not bad and I think with wrap it can go back to how it looks now fairly easily
 
if your ocd will allow, you can retro fit a later Td5 rear door, they are one piece and a lot stronger. I've been after one for a while but keep missing out, or not wiiling to pay silly money that some folk want.

But sweet motor and nice workman ship on the seat box!
 
thanks, il keep my eye out for one of them, the door is in need of repair or replacement anyway (the usual rot on the bottom section)

I was going to repair it, but if there is a better replacement I might look into that!
 
yeah its not cheap but nowhere near the price of a respray, its about 15pm and iv worked out I need 15/16 meters, so looking at 270ish

You can get cheaper stuff, KPMF wrap about £8pm, but after receiving samples for both this avery and the KPMF it looks and feels a bit cheap

I think that's pretty reasonable to be honest. Paints starting to flake off mine so looking at my options cheers.
 
Have you had a look at a swing away rear wheel carrier? Best of both worlds, wheel out the way on the back and very little stress on the back door as most of the weight is transferred to the rear crossmember.
 

Similar threads