leeby7

Active Member

• Feb 9, 2016

• #1

Is there anyone in Bradford that could help or advice me with my wiring on my defender 110 that i'm rebuilding? Having problems getting all the lights working on it, Cheers lee

 

mick the builder

Well-Known Member

• Feb 9, 2016

• #2

Plenty of help on here if you fancy doing it yourself. 99% of the time the problem is bad earths and corroded bullet joints.

 

leeby7

Active Member

• Feb 9, 2016

• #3

Its none of the above as its been strpped to the chassis and the only thing left in it was the bulkhead and engine and box. Thought it was bad earths but think i eliminated that.

 

mick the builder

Well-Known Member

• Feb 9, 2016

• #4

As you have a clear run at everything, try a lenght of wire direct from batt neg. to the fittings and or direct from batt pos to fittings then at various points back along the loom till the lights dont work. Or use multi meter if you have one.

 

zeaphod

Well-Known Member

• Feb 10, 2016

• #5

Give us a bit more detail of what's working and what's not. There's not much to the wiring on a 200tdi.