J

Jaykay1987

Active Member

• Jun 12, 2020

• #1

Hi guys, my heater blower isnt working, done all the usual checks i.e wiring & switch in the dash.

i have power at the fan itself, but dead as a dodo, also put power straight to it, nothing.

is there a replacement fan or some sort of repair kit, as im struggling to find a replacement! cheers guys

 

tottot

Well-Known Member

• Jun 12, 2020

• #2

Several on the flebay.

 

J

Jaykay1987

Active Member

• Jun 12, 2020

• #3

tottot said:

Several on the flebay.

Click to expand...

ive looked i cant find one same as mine, mines an earlier 4c with a 200 disco conversion in

 

tottot

Well-Known Member

• Jun 12, 2020

• #4

Try looking for series 3 heater fan motors, may well be like yours.

 

Flossie

Well-Known Member

• Jun 12, 2020

• #5

Post some pics up of yours, I thought they were all the same defender type up to td5 maybe?
I might have a spare one don't know if it works though, you'll have to tell me which wires need 12+ and earth so I can test it.

 

wireman

Well-Known Member

• Jun 12, 2020

• #6

Is the motor jammed? Try freeing it up/turning it (not with the power on though!)

 

wireman

Well-Known Member

• Jun 12, 2020

• #7

tottot said:

Try looking for series 3 heater fan motors, may well be like yours.

Click to expand...

Here are a selection of heater motors, the series ones are different (though they might be able to be adapted)
https://www.paddockspares.com/catalogsearch/result/?q=heater+motor

 

L

Litch

Well-Known Member

• Jun 12, 2020

• #8

Struggling to understand why you can't just fit a new motor if yours is knackered? Done the quickest of searches and I believe that RTC4200 is the correct one for your MY.
Easy enough job, replaced mine years ago with an OE replacement motor and it has been fine ever since.

 

doriz

Well-Known Member

• Jun 12, 2020

• #9

The job is a pita. More than likely the resistor is at fault. Can you spin the fan up by hand or external voltage, if so its the switch or the low voltage resistor.

 

nobber

Well-Known Member

• Jun 12, 2020

• #10

Put a 12v feed to the fan and see if it spins, at that age Id be dismantling the box and fitting new foam.

 

Huddy84

Well-Known Member

• Jun 12, 2020

• #11

I’m not saying it isn’t an electrical fault, but mine stopped working completely. I took it out, spun it round by hand and sprayed wd40 in it and it works better than before it broke. That was 6yrs ago. If that doesn’t work, looks like RTC4200 recommended by Litch is readily available.