aevans692

Active Member

• Sep 10, 2019

• #1

Hi all , had the guy plug in and read the codes , and he has told me it the shuttle valve on the abs ..

This seems like a pain in the arse job , and expensive ... access to the switch isn't easy .

Im happy to drive it without the abs , but need the lights to go out for the mot ...

any easy fixes, or cheap fixes ??

 

aevans692

Active Member

• Sep 10, 2019

• #2

the guy cleared the faults , and I have been for a drive out , so far they the lights have stayed off ...

been looking to see if the switch can be replaced without removing the whole unit , from what I have read its a wing off job to get access ...

what a pain , Id like the lights to stay off , but im not that lucky ..

 

AdamD1

Well-Known Member

• Sep 10, 2019

• #3

Does the defender suffer the same issue as the D2? The wiring mod fixed mine, bought new pre wired switches so it was really easy to do, comes with a new pair of plugs to connect the mod so it looks factory and no fuss if you ever need to remove the whole thing.

 

aevans692

Active Member

• Sep 10, 2019

• #4

AdamD1 said:

Does the defender suffer the same issue as the D2? The wiring mod fixed mine, bought new pre wired switches so it was really easy to do, comes with a new pair of plugs to connect the mod so it looks factory and no fuss if you ever need to remove the whole thing.

Click to expand...

i am guessing that it is the same problem , I have just seen a kit like to mention on eBay .. think the other problem is access to the unit , some have posted about removing the whole wing to do the switch ..