denis the menace

denis the menace

Active Member
Hi All
I am looking to upgrade the seats in my 110 station waggon. Looking at the rear seats in a freelander they look like they would fit quite easily however the front seats would need cutting and welding. has any one done this or tried and failed as I do not want to buy a set and not be able to use them. Any advise or alternative suggestions welcome.

Cheers guys
 
If you have the skill to weld and fabricate rails etc then do it. But, and this is the problem i have after i fitted buckets. You cant get to the boxes under the front seats for access to the battery etc. Not a problem every day but it will seriously get on your t^ts when you need to jump someone.

My advice(after getting it wrong) would be to go for some exmoor trim after market seats as the seat bases still come off to give you access.

good luck
 
BIG_GINGA_BEARD said:
If you have the skill to weld and fabricate rails etc then do it. But, and this is the problem i have after i fitted buckets. You cant get to the boxes under the front seats for access to the battery etc. Not a problem every day but it will seriously get on your t^ts when you need to jump someone.

My advice(after getting it wrong) would be to go for some exmoor trim after market seats as the seat bases still come off to give you access.

good luck
Click to expand...
thats easy to resolve..i put anderson connector on front of seat box connected to battery and then made up a set of jump leads job done

my front seats i also fitted on bolts that were easily accessable only took 2 mins to remove seats

Photo0811.jpg
 
Last edited:
i got Bmw seats with hinges welded to back of seat rails and pins with R clips though at the front, so pull the pins and seat folds back. also have anderson plug on front bumper for easy jumping. ive got a double cab, you couldnt do this in a 90
 
wiltshire landyman said:
thats easy to resolve..i put anderson connector on front of seat box connected to battery and then made up a set of jump leads job done

my front seats i also fitted on bolts that were easily accessable only took 2 mins to remove seats
Click to expand...

Jesus WLM are you a short arse? :eek: those seats look really close to the wheel? :D

My seats are proper full on buckets so there is no chance of me hinging them or owt like that. Ive decided they need to go. When driving to wales to go laning there starting to be painful! :eek::(
 
BIG_GINGA_BEARD said:
Jesus WLM are you a short arse? :eek: those seats look really close to the wheel? :D

My seats are proper full on buckets so there is no chance of me hinging them or owt like that. Ive decided they need to go. When driving to wales to go laning there starting to be painful! :eek::(
Click to expand...
nope they had height adjusters on prob the mrs had been driving it and left it on highest setting i never had no probs
 
Mind you, just looking at the photo again there quite deep those seats int they.

Prob just the way it looks.
 
Sam's trim and she'll do a parts ex.
 

Attachments

  • DSCN3289.JPG
    DSCN3289.JPG
    283.1 KB · Views: 1,030
  • DSCN3290.JPG
    DSCN3290.JPG
    249.6 KB · Views: 2,777
I've been lusting after some Sams Trim Canvas front seats for mine- think they look the business! another alternative Denis, would be the front seats from a Citroen BX, if you can find any- the bottom section comes away from the back so you can still access the cubby's under the seats.
 
You must log in or register to reply here.

Similar threads

julianf
Heated seat kits for 300tdi era defender seats...
Replies
7
Views
364
dag019
dag019
Clayrr
Semi bucket seats
Replies
4
Views
736
dag019
dag019
lightning
Value me this 110
Replies
14
Views
638
lightning
lightning
B
New Defender 90 Rear Seats Conversion L663
Replies
15
Views
4K
lightning
lightning
M
110 Station Wagon unladen weight and MOT class
Replies
5
Views
388
moth
M