Architect_322

New Member
I have a new front head liner for defender 110 that needs holes drilled for the push fixings, can anyone tell me how many fixings were used originally to hold the head liner and there position? I don't have the old head liner, from what I can see I have 4 fixings at the front (sun visor screws), 4 at the back, then 2 each side, and 1 on each of the curved parts.
 
Thanks for the reply, in regard to the 5 at the rear, what position are the holes? 3 evenly spaced on the flat middle section and one in each corner on the curve? is there a fastening clip dead center? Cheers
 
Last edited:
1 dead centre, 2 either side

1 about 10cm or so from the side panel (just after the curve) the other centred - all of mine are on the flat section

To be honest, the roof lining isn't heavy, so as long as it's supported it should be fine

Not a great picture of my lining when it was out for cleaning, but might help

27399d1323614944-defender-110-front-headliner-fixing-lining.jpg
 

Attachments

  • Lining.jpg
    Lining.jpg
    26.8 KB · Views: 896
Last edited:
Thats brilliant, and just enough time to get it done tonight. Thanks for taking the time to upload the photo, much appreciated.
 

Similar threads