Hello Mike
Wheel bearings ? I don't have a clue.
Roof lining. if it is only minor sagging get some contact adhesive and put it in a hypodermic syringe, push the needle through the lining and inject a bit of glue onto the roof metalwork, wait a couple of minutes, then push the lining back up. this works a treat with no staining if you don't go mad with the glue.
Wheel bearings ? I don't have a clue.
Roof lining. if it is only minor sagging get some contact adhesive and put it in a hypodermic syringe, push the needle through the lining and inject a bit of glue onto the roof metalwork, wait a couple of minutes, then push the lining back up. this works a treat with no staining if you don't go mad with the glue.
Trewey
Cockernee, Pasty munchin bastid.
Whip off the drive member, outer hub nut and tab washer. Tighten inner hub nut to 65Nm, then back it off 90deg, then tighten it to 4Nm. Replace tab washer, replace outer Hub nut and tighten to 65Nm without letting the inner nut move. Secure both nuts with tab washer, replace drive member (using threadlock on bolts).
