J

jackey boy

New Member

• Apr 2, 2010

• #1

hi just brought a 90 td5 only 5 years old with 36,000 on the clock put the light on tonight and the fuel and temp back light arnt working and also on the speedo it looks like their may be more than one bulb out at the moment the speedo looks like the faster you go the more clearly you can read the speed does any one know hoe to access behind the dash pannel to change the bulbs and does the speedo just have one bulb behind it or more

 

M

Mike_B

Active Member

• Apr 3, 2010

• #2

behind the instrument panel, there are four bulbs. Speedo, Fuel, Temp, and Clock. The instrument panel is removed by unscreing the screws around the edge of the panel, on the rh side, by the temp controls, on the left hand side by the vent controls, and the screws underneath the panel. I think theres also one on the top right side of the panel. Once the screws are out, the panel comes forward. dont pull it too fat, as there are obviously cables attached. The bulbs are in plastic holders which just pull out.

 

slim jim

Active Member

• Apr 3, 2010

• #3

There are two behind the speedo and I needed a long socket to twist them out. The others just pull out.

 

M

Mike_B

Active Member

• Apr 3, 2010

• #4

Cheers Jim, I only replaced bulbs in the smaller dials. Speedo was OK

 

M

mgb21

New Member

• Oct 23, 2010

• #5

jim, what did you use to get the bulbs out that are set back into the speedo on your td5 dash? cheers matt

 

Clanforbes

New Member

• Oct 24, 2010

• #6

mgb21 said:

jim, what did you use to get the bulbs out that are set back into the speedo on your td5 dash? cheers matt

Click to expand...

You can get a tool for this, it looks a bit like a biggish radiator key. I got one from Volvo trucks - they used to be used for taking out the bulbs in the old analog tachographs. I'll try to find a link for some. Sorry, I've not been able to find them on the net so far.

 

Last edited: Oct 24, 2010

slim jim

Active Member

• Oct 25, 2010

• #7

mgb21 said:

jim, what did you use to get the bulbs out that are set back into the speedo on your td5 dash? cheers matt

Click to expand...

One of these the 6 mm I think. There about 75 mm long.

 

Attachments

• 
  100_0778.jpg

  232.4 KB · Views: 581
• 
  100_0779.jpg

  233.7 KB · Views: 685
• 
  100_0780.jpg

  237.7 KB · Views: 594

ned kelly

New Member

• Nov 17, 2012

• #8

Replacing my dash lights with blue led's the speedos easy with tweezers but where the hell is the clock one?

 

F1gjam

New Member

• Jul 23, 2013

• #9

I'm also trying to find out how to get into the clock to replace the bulb??? Anyone

 

D

discomania

Well-Known Member

• Jul 23, 2013

• #10

F1gjam said:

I'm also trying to find out how to get into the clock to replace the bulb??? Anyone

Click to expand...

There is a little black slotted head, push it in and turn a 1/4.

 

Last edited: Jul 23, 2013